© 2016 Littelfuse Protection Relays & Controls
Flashers and Tower Lighting Controls
Flashers
www.littelfuse.com/fs500
Rev: 1-A-062316
Specications
Wiring Diagram
FS500 SERIES
Description
The FS500 Series flash rate is adjustable from 10 to 100 FPM.
A locknut is provided to hold selected flash rate. The long-life
electronic circuit combined with a quality electromechanical
relay provides flexibility and reliability in most applications.
Operation
Upon application of input voltage, the output relay is energized
and the ON time begins. At the end of the ON time, the output
relay de-energizes and the OFF time begins. At the end of the
OFF time, the output is energized and the cycle repeats as long
as input voltage is applied.
Reset: Removing input voltage resets the output and
the sequence.
Features & Benefits
FEATURES BENEFITS
Solid-state circuitry with
electromechanical relay
Long life circuitry at a reliable low cost
Industry standard octal
plug connection
Eliminates need for special connectors
Adjustable flash rate
Provides flexibility for user to select flash rate
between 10 - 100 FPM
10A, DPDT isolated
output contacts
Allows control of loads for AC or DC voltages
Accessories
BZ1 Front Panel Mount Kit
Provides an easy method of through-the-panel
mounting of 8- or 11-pin plug-in timers, flashers,
and other controls.
NDS-8 Octal 8-pin Socket
8-pin 35mm DIN rail or surface mount. Surface
mounted with two #6 screws or snaps onto a
35 mm DIN rail. Uses PSC8 hold-down clips.
PSC8 Hold-down Clips
Securely mounts plug-in controls in any position.
Provides protection against vibration. Use with
NDS-8 Octal Socket. Sold in pairs.
C103PM (AL) DIN Rail
35 mm aluminum DIN rail available in a 36 in.
(91.4 cm) length.
V = Voltage
Ordering Information
MODEL INPUT VOLTAGE
FS512 12VDC
FS524 24VAC/DC
FS590 120VAC/DC
If you don’t find the part you need, call us for a custom product 800-843-8848
*(some models)
*
8-PIN
