TRON
®
In-Line Fuseholders HEJ
Single-Pole for SC-35 – 60A and HVW Fuses Series
Form No. HEJ Series
Page 1 of 1
Data Sheet: 2123
Bussmann
®
Catalog and Specification Data
Conductor Terminals
Conductor Data Catalog
Terminal Type Size Symbol
Load &
Line
Copper Crimp #12 to #8 1 • •
A
#12 2 • •
#10 2 • •
#6 1 • • B
#4 1 • •
#8 2 • •
C
#4 1 — •
#6 2 • •
D
#2 1 — •
Copper Set-Screw
#12 to #3 1 • • J
#12 to #2 2 • • K
Aluminum Crimp #6 1 — •
P
#4 1 • —
#3, #4 1 — •
Q
#2 1 • —
Aluminum Set-Screw
#12 to #2 1 • • L
Non-Breakaway Holders
HEJ Series Catalog Symbol: HEJ-AA
(1) (2) (3)
, HEJ-AB,
HEJ-AC, HEJ-BB, HEJ-CC, HEJ-DD, HEJ-JJ, HEJ-JK,
HEJ-LL, HEJ-PP, and HEJ-QQ
In-Line Fuseholders, Single-Pole
Water-Resistant
Agency Information:
(1)
UL Recognized, Guide IZLT2, File E14853
(2)
CSA Certified, Class 6225-01, File 47235
(3)
CE
HEJ — For SC fuses; 35A to 60A and high voltage fuses.
Type HVW, ⁄Ω™ to 6A, 1200Vac (or less).
Fuse size ⁄‹Ω£™∑ ≈ 2⁄Ω¢∑. Holder rated 60A, 480V
Example:
A single-pole, in-line holder for a SC-40 fuse. A single #8
copper, stranded wire is on the load. Copper crimp connec-
tion desired. Two #10 copper, stranded wires are on the line
side. Copper crimp is the desired connection.
1. Choose HEJ- series.
2. Choose “A” for load side.
3. Choose “B” for line side.
Complete Part Number: HEJ-AB
Recommended Torque on Coupling Nut: 10-20 in-lb.
No. Per
Terminal
Solid
Stranded
The only controlled copy of this Data Sheet is the electronic read-only version located on the Bussmann Network Drive. All other copies of this document are by definition uncontrolled. This bulletin is
intended to clearly present comprehensive product data and provide technical information that will help the end user with design applications. Bussmann reserves the right, without notice, to change
design or construction of any products and to discontinue or limit distribution of any products. Bussmann also reserves the right to change or update, without notice, any technical information con-
tained in this bulletin. Once a product has been selected, it should be tested by the user in all possible applications.
Ordering Information:
Load Line
Terminal Terminal
HEJ
Catalog Data — Insulating Boots
Catalog
Numbers Type
2A0660 Single Conductor
2A0661 Two Conductor
Insulating boots are not included with non-breakaway parts
and must be ordered separately. They come standard with the
breakaway series. When boots are utilized, extra heat retention
requires that fuses are sized at a minimum of 200% of the
RMS load current.
7-16-03
N03082
