Thank you I can finally got the components! This is stuff I keep asking for but difficult to search! No one supplier makes it so simply to offer!
US
Kenneth Thomas2021-06-08
So I'm ready for repair my own machine after getting the chips. Thank you for a very helpful IC chips.
US
Charles Jones2021-05-29
OMO have repeatedly delivered these components to extremely high standards.”
TF
Sandra Wilson2021-05-21
goods received very soon, all is ok, parts work fine.
US
Paul Lewis2021-05-15
OMO's service is so perfect, my choice is correct, and I will definitely have more cooperation with OMO in the future.
MX
Helen Smith2021-05-11
I buy this product and came quickly, packing look good. Definitely will purchase from this supplier again.
RU
V***o2019-06-21
Great converter. Put instead of an unidentified five-legged 3,3 v in a digital receiver, so it does not even heat up, unlike the ams1117, which you have to put on the radiator.
HU
I***z2019-05-29
Thank.
MV
A***m2019-05-12
good
RU
A***n2019-03-17
More than 2 months passed. the goods never came, opened a dispute, returned the money.
Descriptions of LTC1264-7CSW#TRPBF provided by its other distributors.
Linear Technology
LTC1264-7 - Linear Phase, Group Delay Equalized, 8th Order Lowpass Filter
Digi-Key
IC FILTER 200KHZ LINEAR 16SOIC
Richardson RFPD
LOW PASS FILTER
Analog Devices
The LTC1264-7 is a clock-tunable monolithic 8th order lowpass filter with linear passband phase and flat group delay. The amplitude response approximates a maximally flat passband and exhibits steeper roll-off than an equivalent 8th order Bessel filter. For instance, at twice the cutoff frequency, the filter attains 28dB attenuation (vs 12dB for Bessel), while at three times the cutoff frequency, the filter attains 55dB attenuation (vs 30dB for Bessel). The cutoff frequency of the LTC1264-7 is tuned via an external TTL or CMOS clock. The clock-to-cutoff frequency ratio of the LTC1264-7 can be set to 25:1 (pin 10 to V+) or 50:1 (pin 10 to V–). When the filter operates at clock-to-cutoff frequency ratio of 25:1, the input is double-sampled to lower the risk of aliasing. The LTC1264-7 is optimized for speed. Depending on the operating conditions, cutoff frequencies between 200kHz and 250kHz can be obtained. (Please refer to the Passband vs Clock Frequency graphs.) The LTC1264-7 is pin-compatible with the LTC1064-X series. Applications Data Communication Filters Time Delay Networks Phase Matched Filters
Analog Devices offers its ADXL354 and ADXL355, low-noise, low-power, 3-axis mems accelerometers featured in a 14-terminal, 6 mm x 6 mm x 2.1 mm LCC package.
Analog Devices' ADuM3150 and ADuM4150 are 3.75 kV and 5 kVRMS, 6-channel SPIsolator™ digital isolators, optimized for isolated serial peripheral interfaces (SPIs).
US
Thank you I can finally got the components! This is stuff I keep asking for but difficult to search! No one supplier makes it so simply to offer!
US
So I'm ready for repair my own machine after getting the chips. Thank you for a very helpful IC chips.
US
OMO have repeatedly delivered these components to extremely high standards.”
TF
goods received very soon, all is ok, parts work fine.
US
OMO's service is so perfect, my choice is correct, and I will definitely have more cooperation with OMO in the future.
MX
I buy this product and came quickly, packing look good. Definitely will purchase from this supplier again.
RU
Great converter. Put instead of an unidentified five-legged 3,3 v in a digital receiver, so it does not even heat up, unlike the ams1117, which you have to put on the radiator.
HU
Thank.
MV
good
RU
More than 2 months passed. the goods never came, opened a dispute, returned the money.