For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
AMPLIFIERS - LOW NOISE - SMT
7
7 - 8
Evaluation PCB
Item Description
J1 - J2 PCB Mount SMA Connector
J3 - J4 DC Pin
C1 2.7 pF Capacitor, 0402 Pkg.
C2 1000 pF Capacitor, 0402 Pkg.
C3 10 nF Capacitor, 0603 Pkg.
C4 2.2 μF Capacitor, CASE-A Tantalum
L1 2 nH Inductor, 0402 Pkg.
U1 HMC667LP2(E) Ampli er
PCB
[2]
117163 Evaluation PCB
[1] When requesting an evaluation board, please reference the
appropriate evaluation PCB number listed in the table
“Components for Selected Band” on previous page
[2] Circuit Board Material: Rogers 4350
List of Materials for Evaluation PCB
[1]
The circuit board used in this application should use
RF circuit design techniques. Signal lines should
have 50 Ohm impedance while the package ground
leads and exposed paddle should be connected
directly to the ground plane similar to that shown.
A sufficient number of via holes should be used to
connect the top and bottom ground planes. The
evaluation board should be mounted to an appro-
priate heat sink. The evaluation circuit board shown
is available from Hittite upon request.
HMC667LP2 / 667LP2E
v02.1110
GaAs PHEMT MMIC LOW NOISE
AMPLIFIER, 2.3 - 2.7 GHz
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
