CPC5622A Datasheet CPC5622ATR, CPC5622A, CPC5622-EVAL-EUR | P1-P3

NTEGRATED

IRCUITS

IVISION

DS-CPC5622-R03 www.ixysic.com 1

Features

• Superior voice solution with low noise and excellent

part-to-part gain accuracy

• 3 kV

RMS

line isolation

• Simultaneous ringing detection and CID monitoring

for worldwide applications

• Provides both full-wave ringing detect and half-wave

ringing detect for maximum versatility

• Transmit power of up to +10 dBm into 600 

• Data access arrangement (DAA) solution for modem

speeds up to V.92

• 3.3V or 5 V power supply operation

• Easy interface with modem ICs and voice CODECs

• Worldwide dial-up telephone network compatibility

• CPC5622 can be used in circuits that comply with

the requirements of TIA/EIA/IS-968 (FCC part 68),

UL60950 (UL1950), EN/IEC 60950-1

Supplementary Isolation Compliant, IEC60950,

EN55022B, CISPR22B, EN55024, and TBR-21

• Line-side circuit powered from telephone line

• Compared to other silicon DAA solutions, LITELINK:

- Uses fewer passive components

- Takes up less printed-circuit board space

- Uses less telephone line power

- Is a single-IC solution

Applications

• Computer telephony and gateways, such as VoIP

• PBXs

• Satellite and cable set-top boxes

• V.92 (and other standard) modems

• Fax machines

• Voicemail systems

• Embedded modems for POS terminals, automated

banking, remote metering, vending machines,

security, and surveillance

Description

LITELINK III is a single-package silicon phone line

interface (PLI) DAA used in voice and data

communication applications to make connections

between low-voltage equipment and high-voltage

telephone networks.

LITELINK uses on-chip optical components and a few

inexpensive external components to form the required

high voltage isolation barrier. LITELINK eliminates the

need for large isolation transformers or capacitors

used in other phone line interface configurations.

LITELINK also provides AC and DC phone line

terminations, switchhook, 2-wire to 4-wire hybrid,

ringing detection, and full time receive on-hook

transmission capability.

The CPC5622 is a member of, and builds upon, IXYS

Integrated Circuits Division’s third generation of

LITELINK products with improved insertion loss

performance and lower minimum current draw from

the phone line. The CPC5622 version of LITELINK III

provides concurrent ringing detection and CID

monitoring for world wide applications. Both half-wave

and full-wave ringing detection are provided for

maximum versatility.

Ordering Information

CPC5622 Block Diagram

3kV

rms

Isolation

Part Number Description

CPC5622A 32-Pin SOIC Phone Line Interface, 50/tube

CPC5622ATR

32-Pin SOIC Phone Line Interface,

tape and reel, 1000/reel

Transconductance

Stage

2-4 Wire Hybrid

AC/DC Termination

Hook Switch

Isolation Barrier

Tx.

Gain

Tr im

Rx.

Gain

Tr im

Snoop

Amplifier

Receive

Isolation

Amplifier

Transmit

Isolation

Amplifier

TIP

RING

Transmit

Diff.

Amplifier

Tx+

Tx-

RING

MODE

RING2

Receive

Diff.

Amplifier

Rx+

Rx-

SNOOP

Rx Amp

Ringing Det.

Half Wave

Ringing Detect Outputs

Full Wave

CPC5622

LITELINK

III

Phone Line Interface IC (DAA)

NTEGRATED

IRCUITS

IVISION

CPC5622

2 www.ixysic.com R03

1. Electrical Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

1.1 Absolute Maximum Ratings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

1.2 Performance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

1.3 Pin Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

2. Application Circuits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

2.1 Resistive Termination Application Circuit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

2.1.1 Resistive Termination Application Circuit Part List. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

2.2 Reactive Termination Application Circuit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

2.2.1 Reactive Termination Application Circuit Part List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

3. Using LITELINK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

3.1 Switch Hook Control (On-hook and Off-hook States) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

3.2 On-hook Operation: OH

=1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

3.2.1 Ringing Signal Reception via the Snoop Circuit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

3.3 Off-Hook Operation: OH

=0 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

3.3.1 Receive Signal Path. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

3.3.2 Transmit Signal Path . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

3.4 Initialization Requirement Following Power-up . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

3.5 DC Characteristics. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

3.5.1 Setting a Current Limit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

3.6 AC Characteristics. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

3.6.1 Resistive Termination Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

3.6.2 Reactive Termination Applications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

3.6.3 Mode

Pin Usage. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

4. Regulatory Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

5. LITELINK Design Resources . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

6. LITELINK Performance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

7. Manufacturing Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

7.1 Mechanical Dimensions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

NTEGRATED

IRCUITS

IVISION

CPC5622

R03 www.ixysic.com 3

1. Electrical Specifications

1.1 Absolute Maximum Ratings

Unless otherwise specified all specifications are at

25C and V

=5.0V.

Absolute maximum ratings are stress ratings.

Stresses in excess of these ratings can cause

permanent damage to the device. Functional

operation of the device at conditions beyond those

indicated in the operational sections of this data sheet

is not implied.

Parameter Minimum Maximum Unit

-0.3 6 V

Logic Inputs -0.3

+ 0.3

Continuous Tip to Ring

Current (R

ZDC

= 5.2)

-150mA

Total Package Power

Dissipation

-1W

Isolation Voltage - 3000

rms

Operating temperature -40 +85 °C

Storage temperature -40 +125 °C

P1-P3 P4-P6 P7-P9 P10-P12 P13-P15 P16-P18

CPC5622A

Mfr. #:

Buy CPC5622A

Manufacturer:

IXYS Integrated Circuits

Description:

Telecom Interface ICs LITELINK III Phone Line Int IC

Lifecycle:

New from this manufacturer.

Delivery:

DHL FedEx Ups TNT EMS

Payment:

T/T Paypal Visa MoneyGram Western Union

CPC5622A

CPC5622A

Products related to this Datasheet