Table 16: Identify Device (Continued)
See Note 1 for setting definitions
Word Bit(s) Setting Default Value Description
70 F 0000h Reserved
71 F 0000h 0000h
0000h 0000h
Reserved for the IDENTIFY PACKET DEVICE command
75 Queue depth
15–5 F 00000000000b Reserved
4–0 F 11111b Maximum queue depth - 1
76 Serial ATA capabilities
15 F 0b 1 = Supports READ LOG DMA EXT as equivalent to READ
LOG EXT
14 F 1b 1 = Supports device automatic partial to slumber transitions
13 F 1b 1 = Supports host automatic partial to slumber transitions
12 F 1b Supports Native Command Queuing priority information
11 F 0b Supports Unload while NCQ commands outstanding
10 F 1b Supports Phy event counters
9 F 1b Supports receipt of host initiated interface power manage-
ment requests
8 F 1b Supports native Command Queueing
7–4 F 0000b Reserved for future Serial ATA signaling speed grades
3 F 1b 1 = Supports Serial ATA Gen-3 speed (6.0 Gb/s)
2 F 1b 1 = Supports Serial ATA Gen-2 speed (3.0 Gb/s)
1 F 1b 1 = Supports Serial ATA Gen-1 speed (1.5 Gb/s)
0 F 0b Reserved (set to 0)
77 Serial ATA additional capabilities
15–8 F 00000000b Reserved for future Serial ATA definition
7 F 1b 1 = Supports DEVSLP_to_ReducedPwrState
6 F 0b Reserved
5 F 0b Supports NCQ Queue Management Command
4 F 0b Supports NCQ Streaming
3–1 V 010b Coded value indicating current negotiated Serial ATA signal
speed
0 F 0b Shall be cleared to zero
M500 2.5-Inch NAND Flash SSD
Device ID
PDF: 09005aef84fed121
m500_2_5_ssd.pdf - Rev. E 9/13 EN
19
Micron Technology, Inc. reserves the right to change products or specifications without notice.
© 2013 Micron Technology, Inc. All rights reserved.
Table 16: Identify Device (Continued)
See Note 1 for setting definitions
Word Bit(s) Setting Default Value Description
78 Serial ATA features supported
15–8 F 000000000b Reserved
7 F 1b 1 = Supports NCQ Autosense
6 F 1b 1 = Supports software settings preservation
5 F 0b Reserved
4 F 0b 1 = Supports in-order data delivery
3 F 1b 1 = Supports dev initiate interface power management
2 F 1b 1 = Supports DMA Setup Auto-Activate optimization
1 F 0b 1 = Supports non-zero buffer offsets in DMA Setup FIS
0 F 0b Reserved (set to 0)
79 Serial ATA features enabled
15–7 V 000000000b Reserved
6 V 1b 1 = Software settings preservation enabled
5 V 0b 1 = Asynchronous notification enabled
4 V 0b 1 = In-order data delivery enabled
3 V 0b 1 = Device initiating interface power management enabled
2 V 0b 1 = DMA Setup Auto-Activate optimization enabled
1 V 0b 1 = Non-zero buffer offsets in DMA Setup FIS enabled
0 V 0b Reserved (set to 0)
80 Major revision number
15–10 F 000000b Reserved
9 F 1b 1 = Supports ATA8-ACS2
8 F 1b 1 = Supports ATA8-ACS
7 F 1b 1 = Supports ATA/ATAPI-7
6 F 1b 1 = Supports ATA/ATAPI-6
5 F 1b 1 = Supports ATA/ATAPI-5
4 F 1b 1 = Supports ATA/ATAPI-4
3 F 1b Obsolete
2 S 0b Obsolete
1 S 0b Obsolete
0 F 0b Reserved
81 F 0028h Minor revision number
0028h = ATA8-ACS version 6
M500 2.5-Inch NAND Flash SSD
Device ID
PDF: 09005aef84fed121
m500_2_5_ssd.pdf - Rev. E 9/13 EN
20
Micron Technology, Inc. reserves the right to change products or specifications without notice.
© 2013 Micron Technology, Inc. All rights reserved.
Table 16: Identify Device (Continued)
See Note 1 for setting definitions
Word Bit(s) Setting Default Value Description
82 Command set supported
15 X 0b Obsolete
14 F 1b 1 = NOP command supported
13 F 1b 1 = READ BUFFER command supported
12 F 1b 1 = WRITE BUFFER command supported
11 X 0b Obsolete
10 F 1b 1 = Host Protected Area feature set supported
9 F 0b 1 = DEVICE RESET command supported
8 F 0b 1 = SERVICE interrupt supported
7 F 0b 1 = Release interrupt supported
6 F 1b 1 = Read look-ahead supported
5 F 1b 1 = Write cache supported
4 F 0b Shall be cleared to zero to indicate that the PACKET feature
set is not supported.
3 F 1b 1 = Mandatory Power Management feature set supported
2 F 0b Obsolete
1 F 1b 1 = Security feature set supported
0 F 1b 1 = SMART feature set supported
83 Command set supported
15 F 0b Shall be cleared to zero
14 F 1b Shall be set to one
13 F 1b 1 = FLUSH CACHE EXT command supported
12 F 1b 1 = Mandatory FLUSH CACHE command supported
11 F 1b 1 = Device Configuration Overlay feature set supported
10 F 1b 1 = 48-bit address feature set supported
9 F 0b 1 = Automatic Acoustic Management feature set supported
8 F 1b 1 = SET MAX security extension supported
7 F 0b See Address Offset Reserved Area Boot INCITS TR27:2001
6 F 0b 1 = SET FEATURES subcommand required to spin-up after
power-up
5 F 0b 1 = Power-Up In Standby feature set supported
4 F 0b Obsolete
3 F 1b 1 = Advanced Power Management feature set supported
2 F 0b 1 = CFA feature set supported
1 F 0b 1 = READ/WRITE DMA QUEUED supported
0 F 1b 1 = DOWNLOAD MICROCODE command supported
M500 2.5-Inch NAND Flash SSD
Device ID
PDF: 09005aef84fed121
m500_2_5_ssd.pdf - Rev. E 9/13 EN
21
Micron Technology, Inc. reserves the right to change products or specifications without notice.
© 2013 Micron Technology, Inc. All rights reserved.

MTFDDAV120MAV-1AE12ABYY

Mfr. #:
Manufacturer:
Micron
Description:
SSD 120GB M.2 MLC SATA III 3V
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet