© 2013 International Rectifier
Absolute Maximum Ratings
Absolute Maximum Ratings indicate sustained limits beyond which damage to the device may occur. All voltage
parameters are absolute voltages referenced to COM; all currents are defined positive into any lead. The Thermal
Resistance and Power Dissipation ratings are measured under board mounted and still air conditions
High side floating supply voltage
High side floating supply voltage
††
High side floating output voltage
Low side fixed supply voltage
††
Floating input positive supply voltage
††
Floating input negative supply voltage
††
Floating input supply ground voltage
Inverting input current
†
Floating input positive supply zener clamp current
††
Floating input negative supply zener clamp current
††
Low side supply zener clamp current
†††
Floating supply zener clamp current
†††
Allowable Vs voltage slew rate
Allowable Vss voltage slew rate
†††
Maximum power dissipation @ T
A
+25C
Thermal resistance, Junction to ambient
Lead temperature (soldering, 10 seconds)
IN- contains clamping diode to GND.
V
DD
– IN+, GND -V
SS
, V
CC
-COM and V
B
-V
S
contain internal shunt zener diodes. Please note that the
voltage ratings of these can be limited by the clamping current.
For the rising and falling edges of step signal of 10 V. V
SS
=15 V to 200 V.