3
Device Selection Guide
Notes:
1. Tolerance for luminous intensity measurement is +/- 15%
2. The luminous intensity is measured on the mechanical axis of the lamp package.
3. The optical axis is closely aligned with the package mechanical axis.
4. 2θ
1/2
is the off-axis angle where the luminous intensity is ½ the
on axis intensity
5. Part numbers in BOLD are recommended for new designs.
Part Number
Typ ical Viewing An gle,
2θ ½ (Degree)
Intensity (mcd) at 20 MA
Standoff
Package
DimensionMin. Max.
HLMP-CW46-PS0xx 50 880 2500 No A
HLMP-CW46-QR0xx 50 1150 1900 No A
HLMP-CW46-QRBxx 50 1150 1900 No A
HLMP-CW46-RU0xx 50 1500 4200 No A
HLMP-CW46-ST0xx 50 1900 3200 No A
HLMP-CW46-STBxx 50 1900 3200 No A
HLMP-CW47-PS0xx 50 880 2500 Yes B
HLMP-CW47-QR0xx 50 1150 1900 Yes B
HLMP-CW47-QRBxx 50 1150 1900 Yes B
HLMP-CW47-RU0xx 50 1500 4200 Yes B
HLMP-CW47-ST0xx 50 1900 3200 Yes B
HLMP-CW47-STBxx 50 1900 3200 Yes B
HLMP-CW76-NR0xx 70 680 1900 No A
HLMP-CW76-PQ0xx 70 880 1500 No A
HLMP-CW76-PQBxx 70 880 1500 No A
HLMP-CW76-QT0xx 70 1150 3200 No A
HLMP-CW76-RS0xx 70 1500 2500 No A
HLMP-CW76-RSBxx 70 1500 2500 No A
HLMP-CW77-NR0xx 70 680 1900 Yes B
HLMP-CW77-PQ0xx 70 880 1500 Yes B
HLMP-CW77-PQBxx 70 880 1500 Yes B
HLMP-CW77-QT0xx 70 1150 3200 Yes B
HLMP-CW77-RS0xx 70 1500 2500 Yes B
HLMP-CW77-RSBxx 70 1500 2500 Yes B