OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

LQH2HPZ150MJRL

P1-P3P4-P6P7-P8
Spec No. JELF243A-9129B-01 P1/9
MURATA MFG.CO., LTD
Reference Onl
y
CHIP COIL（CHIP INDUCTORS）LQH2HPZ□□□□JRL SPECIFICATION
Murata Standard Reference Specification【AEC-Q200】
1. Scope
This reference specification applies to Chip coil (Chip Inductors) LQH2HPZ_JR series for Automotive Electronics based
on AEC-Q200 except for Power train and Safety.
2. Part Numbering
(ex) LQ H 2H P Z 220 M J R L
Product ID
Structure Dimension
Applications Category Inductance Tolerance Dimension Others
Packaging
(L×W)
and
(T)
L: Φ180Taping
Characteristics
3. Rating
・Operating Temperature Range.
(Ambient temperature; Self-temperature rise is not included) -40 to +105°C
(Product temperature; Self- temperature rise is included) -40 to +125°C
・Storage Temperature Range. -40 to +105°C
Customer
Part Number
Murata
Part Number
Inductance
DC
Resistance
(Ω)
Self
Resonant
Frequency
(MHz min)
Rated Current(mA)
ESD
5A:
8kV
(µH)
Tolerance
(%)
∗1 (Based on
inductance
change)
∗2 Based on
Temperature rise
∗3 Ambient
temperature
(85 )℃
∗4 Ambient
temperature
(105 )℃
LQH2HPZR47NJRL 0.47
N:±30
0.031±20% 190 3500 2750 1650
5A
LQH2HPZ1R0NJRL 1.0 0.048±20% 120 2600 2400 1440
LQH2HPZ1R2NJRL 1.2 0.055±20% 100 2450 2070 1240
LQH2HPZ1R5NJRL 1.5 0.075±20% 95 2200 1810 1080
LQH2HPZ2R2MJRL 2.2
M:±20
0.092±20% 50 1700 1650 990
LQH2HPZ3R3MJRL 3.3 0.13±20% 45 1450 1420 850
LQH2HPZ4R7MJRL 4.7 0.17±20% 40 1230 1290 770
LQH2HPZ6R8MJRL 6.8 0.26±20% 35 1050 1000 600
LQH2HPZ100MJRL 10 0.38±20% 30 830 830 490
LQH2HPZ150MJRL 15 0.55±20% 20 690 710 420
LQH2HPZ220MJRL 22 0.84±20% 20 530 540 320
∗1: When applied Rated current to the Products, Inductance will be within ±30% of intial inductance value range .
∗2:
Keep the temperature(ambient temperature plus self-generation of heat) under 125 . ℃
∗3: When applied rated current to the Products, temperature rise caused by self-generated heat shall be limited
to 40 max.℃ (Ambient temperature 85℃).
∗4:When applied rated current to the Products,temperature rise caused by self-generated heat shall be limited to 20 ℃
max. (Ambient temperature 85-105℃).
4. Testing Conditions
《Unless otherwise specified》 《In case of doubt》
Temperature : Ordinary Temperature (15 to 35°C) Temperature : 20 ± 2°C
Humidity : Ordinary Humidity (25 to 85 % (RH)) Humidity : 60 to 70 %
(RH)
Atmospheric Pressure : 86 to 106 kPa
Spec No. JELF243A-9129B-01 P2/9
MURATA MFG.CO., LTD
Reference Only
5. Appearance and Dimensions
■Unit Mass (Typical value)
0.023ｇ
6. Electrical Performance
No. Item Specification Test Method
6.1 Inductance Inductance shall meet item 3. Measuring Equipment : KEYSIGHT 4192A or equivalent
Measuring Frequency: 1MHz
6.2 DC Resistance DC Resistance shall meet item 3. Measuring Equipment: Digital multi meter
6.3 Self Resonant
Frequency
(S.R.F)
S.R.F shall meet item 3. Measuring Equipment: KEYSIGHT E4991A or equivalent
7. AEC-Q200 Requirement
7.1 Performance (based on Table 5 for Magnetics(Inductors / Transformer)
AEC-Q200 Rev.D issued June. 1 2010
AEC-Q200
Murata Specification / Deviation
No Stress Test Method
3 High
Temperature
Exposure
1000hours at 125 deg C
Set for 24hours at room
temperature, then measured.
Meet Table A after testing.
Table A
4 Temperature Cycling 1000cycles
-40 deg C to + 105deg C
Set for 24hours at room
temperature,then measured.
Meet Table A after testing.
7 Biased Humidity 1000hours at 85 deg C, 85%RH
unpowered.
Meet Table A after testing.
8 Operational Life Apply Rated Current 85 deg C
1000 hours
Set for 24hours at room
temperature, then measured
Meet Table A after testing.
9 External Visual Visual inspection
No abnormalities
10 Physical Dimension Meet ITEM 5
(Style and Dimensions)
No defects
12 Resistance
to Solvents
Per
MIL-STD-202
Method 215
Not Applicable
Appearance No damage
Inductance Change (at 1MHz) Within ±10%
DC Resistance Change Within ±10%
A
: 2.75 MAX
B: 2.25 MAX
Spec No. JELF243A-9129B-01 P3/9
MURATA MFG.CO., LTD
Reference Only
AEC-Q200
Murata Specification / Deviation
No Stress Test Method
13 Mechanical Shock
Per MIL-STD-202
Method 213
Condition C
100g’s/6ms/Half sine
Meet Table A after testing.
14 Vibration 5g's for 20 minutes,
12cycles eah of 3 orientations
Test from 10-2000Hz.
Meet Table A after testing.
15 Resistance
to Soldering Heat
No-heating
Solder temperature
260C+/-5 deg C
Immersion time 10s
Pre-heating: 150 to 180C /90±30s
Meet Table B after testing.
Table B
17 ESD
Per AEC-Q200-002 ESD Rank: Refer to Item 3. Rating
No defects
18 Solderbility Per J-STD-002 Method b : Not Applicable
95% of the terminations is to be soldered.
(Except exposed wire)
19 Electrical
Characterization
Measured : Inductance No defects
20 Flammability Per UL-94 Not Applicable
21 Board Flex Epoxy-PCB(1.6mm)
Deflection 2mm(min)
60s minimum holding time
Holding time: 5s
Meet Table A after testing.
22 Terminal Strength Per AEC-Q200-006
A force of 17.7N for 60s
No defects
8. Specification of Packaging
8.1 Appearance and Dimensions of plastic tape
(in mm)
Dimension of the Cavity is
measured at the bottom side.
Appearance No damage
Inductance Change (at 1MHz) Within ±20%
DC Resistance Change Within ±10%
P1-P3P4-P6P7-P8

LQH2HPZ150MJRL

Mfr. #:
Buy LQH2HPZ150MJRL
Manufacturer:
Murata Electronics
Description:
Fixed Inductors 1008 15uH 20% 690mA AEC-Q200
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet