544M-01LF

ICS544-01
CLOCK DIVIDER CLOCK DIVIDER
IDT®
CLOCK DIVIDER 4
ICS544-01 REV B 051810
DC Electrical Characteristics
Unless stated otherwise, VDD = 2.25 V to 3.6 V, C
L
=15pF ±5%, Ambient Temperature -40° C to +85° C
AC Electrical Characteristics
Unless stated otherwise, VDD = 2.25 V to 3.6 V±5%, C
L
=15pF ±5%, Ambient Temp -40° C to +85° C
Thermal Characteristics
Parameter Symbol Conditions Min. Typ. Max. Units
Operating Voltage VDD 2.25 3.6 V
Input High Voltage V
IH
S0, S1, OE, ICLK 0.7VDD V
Input Low Voltage V
IL
S0, S1, OE, ICLK 0.3VDD V
Output High Voltage V
OH
I
OH
= -2 mA VDD-0.4 VDD-0.15 V
Output Low Voltage V
OL
I
OL
= 2 mA 0.15 0.4 V
Operating Supply Current I
DD
VDD =2.25 V - 2.75 V 0.3 0.6 mA
Operating Supply Current I
DD
VDD= 2.75 V - 3.6 V 0.5 1 mA
Standby Current I
SB
OE=0 10 ua
Short Circuit Current I
OS
±40 mA
Input Capacitance C
IN
S0, S1, OE 4 pF
Nominal Output Impedance Z
O
at VDD/2 20 Ω
Internal Pull-up Resistor Rpup OE, S1, S0 420 kΩ
Parameter Symbol Conditions Min. Typ. Max. Units
Input Frequency, clock input VDD = 3.3 V 0 16.777216 MHz
Output Rise Time t
OR
0.1VDD to 0.9VDD 0.2 1 μs
Output Fall Time t
OF
0.9VDD to 0.1VDD 0.2 1 μs
Duty Cycle at VDD/2 45 49 to 51 55 %
Output Enable Delay Time t
OE
OE going high to CLK
output valid
2 μs
Output Disable Delay Time t
OD
OE going low to CLK
output invalid
2 μs
Parameter Symbol Conditions Min. Typ. Max. Units
Thermal Resistance Junction to
Ambient
θ
JA
Still air 150 ° C/W
θ
JA
1 m/s air flow 140 ° C/W
θ
JA
3 m/s air flow 120 ° C/W
Thermal Resistance Junction to Case θ
JC
40 ° C/W
ICS544-01
CLOCK DIVIDER CLOCK DIVIDER
IDT®
CLOCK DIVIDER 5
ICS544-01 REV B 051810
Marking Diagram (ICS554M-01LF) Marking Diagram (ICS554MI-01LF)
Notes:
1. ###### is the lot number.
2. YYWW is the last two digits of the year and week that the part was assembled.
3. “L” or “LF” denotes Pb (lead) free package.
4. “I” denotes industrial temperature range.
5. Bottom Marking: (origin)
Origin = country of origin if not USA.
554M01LF
######
YYWW
14
58
554MI01L
######
YYWW
14
58
ICS544-01
CLOCK DIVIDER CLOCK DIVIDER
IDT®
CLOCK DIVIDER 6
ICS544-01 REV B 051810
Package Outline and Package Dimensions (8-pin SOIC, 150 Mil. Body)
Package dimensions are kept current with JEDEC Publication No. 95
Ordering Information
"LF" suffix to the part number are the Pb-Free configuration and are RoHS compliant.
While the information presented herein has been checked for both accuracy and reliability, Integrated Device Technology (IDT)
assumes no responsibility for either its use or for the infringement of any patents or other rights of third parties, which would result
from its use. No other circuits, patents, or licenses are implied. This product is intended for use in normal commercial
applications. Any other applications such as those requiring extended temperature range, high reliability, or other extraordinary
environmental requirements are not recommended without additional processing by IDT. IDT reserves the right to change any
circuitry or specifications without notice. IDT does not authorize or warrant any IDT product for use in life support devices or
critical medical instruments.
Part / Order Number Marking Shipping Packaging Package Temperature
544M-01LF 544M01LF Tubes 8-pin SOIC 0 to +70° C
544M-01LFT 544M01LF Tape and Reel 8-pin SOIC 0 to +70° C
544MI-01LF 544MI01L Tubes 8-pin SOIC -40 to +85° C
544MI-01LFT 544MI01L Tape and Reel 8-pin SOIC -40 to +85° C
INDEX
AREA
1 2
8
D
E
SEATING
PLANE
A1
A
e
- C -
B
.10 (.004)
C
C
L
H
h x 45
Millimeters Inches
Symbol Min Max Min Max
A 1.35 1.75 .0532 .0688
A1 0.10 0.25 .0040 .0098
B 0.33 0.51 .013 .020
C 0.19 0.25 .0075 .0098
D 4.80 5.00 .1890 .1968
E 3.80 4.00 .1497 .1574
e 1.27 BASIC 0.050 BASIC
H 5.80 6.20 .2284 .2440
h 0.25 0.50 .010 .020
L 0.40 1.27 .016 .050
α 0° 8° 0° 8°

544M-01LF

Mfr. #:
Manufacturer:
IDT
Description:
Clock Drivers & Distribution CLOCK DIVIDER
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet