Data Sheet AD1933
Rev. E | Page 25 of 28
OUTLINE DIMENSIONS
COMPLIANT TO JEDEC STANDARDS MS-026-BCD
051706-A
TOP VIEW
(PINS DOWN)
1
16
17
33
32
48
4964
0.27
0.22
0.17
0.50
BSC
LEAD PITCH
12.20
12.00 SQ
11.80
PIN 1
1.60
MAX
0.75
0.60
0.45
10.20
10.00 SQ
9.80
VIEW A
0.20
0.09
1.45
1.40
1.35
0.08
COPLANARITY
VIEW A
ROTATED 90° CCW
SEATING
PLANE
0.15
0.05
7°
3.5°
0°
Figure 24. 64-Lead Low Profile Quad Flat Package [LQFP]
(ST-64-2)
Dimensions shown in millimeters
ORDERING GUIDE
Model
1, 2, 3
Temperature Range Package Description Package Option
AD1933YSTZ −40°C to +105°C 64-Lead LQFP ST-64-2
AD1933YSTZ-RL −40°C to +105°C 64-Lead LQFP, 13” Tape and Reel ST-64-2
AD1933WBSTZ −40°C to +105°C 64-Lead LQFP ST-64-2
AD1933WBSTZ-RL −40°C to +105°C 64-Lead LQFP, 13” Tape and Reel ST-64-2
EVAL-AD1939AZ Evaluation Board
1
Z = RoHS Compliant Part.
2
The EVAL-AD1939AZ should be used as the evaluation board for the AD1933. The AD1933 is a DAC-only equivalent to the AD1939.
3
W = Qualified for Automotive Applications.
AUTOMOTIVE PRODUCTS
The AD1933W models are available with controlled manufacturing to support the quality and reliability requirements of automotive
applications. Note that these automotive models may have specifications that differ from the commercial models; therefore, designers
should review the Specifications section of this data sheet carefully. Only the automotive grade products shown are available for use in
automotive applications. Contact your local Analog Devices account representative for specific product ordering information and to
obtain the specific Automotive Reliability reports for these models.
