B233
DF11 Series●2mm Double-Row Connector (Product Compliant to UL/CSA Standard)
BPrecautions
1.
Recommended Temperature Profile
(
SMT
)
2.
Recommended Manual Soldering Condition
(
SMT
)
3.
Recommended Screen Thickness
(
SMT
)
4. Board Warp age
(
SMT
)
5.
Recommended Soldering Condition
(Through hole)
6. Cleaning Condition
7. Connection Condition
Note1: UP to 2 cycles of Reflow soldering are possible under the same conditions, provided that
there is a return to normal temperature between the first and second cycle
Note2: The temperature profile indicates the board surface temperature at the point of contacts
with the connector terminals.
Soldering iron temperature: 290
±
10
ç
, Soldering time: Within 2 seconds
0.15 to 0.2mm
Based on the both connector edges, 0.03mm max. is allowed in the connector center area.
Flow: 250ç for 10 seconds
Manual soldering: 290ç for 2 seconds
Refer to the "Nylon Connector Use Hand book".
Refer to the "Nylon Connector Use Hand book".
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
