MTA-B-03027 D (6/14)
4. Applicable Module Name
Magnetic card read
No
Module Name
Track 1
Track 2
Track 3
ICC
controller
SAM Bezel
1 V4KF-01JS-001 R*1 R R Y*2 1SAM Round Type
2 V4KF-01JF-001 R R R Y 1SAM Flat Type
3 V4KF-01JS-002 R R R Y 5SAM Round Type
5. Specifications
5.1 Mechanical Specification
[1] External dimensions (See Outline Drawing)
Width
Height
Length
V4KF-01JS-001
80.0mm 50.0mm 133.0mm (147.0 mm *1)
V4KF-01JF-001
101.6mm 76.2mm 133.0mm (147.0 mm *1)
V4KF-01JS-002 80.0mm 50.0mm 134.5mm (147.0 mm *1)
*1 Including connector’s lock
[2] Weight Less than 250g
[3] Mounting (See Outline Drawing)
(1) In case of using the Mounting Hole (V4KF-01JS-001, V4KF-01JF-001, V4KF-01JS-002)
1) Screw M3
2) Quantity 4 pieces
3) Torque Less than 0.79N･m
<Notice>
Design the mounting bases to keep the difference within +/-0.2mm in height among four
mounting holes (refer to Outline drawing about location of these holes)
(2) In case of using the Screw Hole of Bezel (V4KF-01JF-001)
1) Screw M4
2) Quantity 4 pieces
3) Torque Less than 1.30N･m
<Notice>
Select the screw in order to keep the meshing length 4.0mm or less.
[4] Card position detection
Two photo sensors (S1, S2) are provided in order to detect the card. The state of these sensors
can be retrieved by the command and response.
5.2 Magnetic card function
[1] Magnetic card type In conformity to ISO/IEC 7810/ID-1, ISO/IEC 7811-1/2/6
[2] Reading function Read specified tracks simultaneously.
[3] Reading direction Bi-directional capability (insert/pull out)
[4] Card speed 100-1000 mm/s capability (at flat card)
*1
R
:
Magnetic reading function
*2
Y
:
8 contacts for C1 to C8 are provided.
