LM158, LM158A, LM258, LM258A
LM358, LM358A, LM2904, LM2904Q
DUAL OPERATIONAL AMPLIFIERS
SLOS068E – JUNE 1976 – REVISED SEPTEMBER 2002
1
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
Wide Range of Supply Voltages:
– Single Supply ...3 V to 30 V
(LM2904 and LM2904Q ...3 V to 26 V) or
– Dual Supplies
Low Supply-Current Drain Independent of
Supply Voltage . . . 0.7 mA Typ
Common-Mode Input Voltage Range
Includes Ground, Allowing Direct Sensing
Near Ground
Low Input Bias and Offset Parameters:
– Input Offset Voltage ...3 mV Typ
A Versions ...2 mV Typ
– Input Offset Current ...2 nA Typ
– Input Bias Current . . . 20 nA Typ
A Versions . . . 15 nA Typ
Differential Input Voltage Range Equal to
Maximum-Rated Supply Voltage . . . ±32 V
(LM2904 and LM2904Q . . . ±26 V)
Open-Loop Differential Voltage
Amplification . . . 100 V/mV Typ
Internal Frequency Compensation
description/ordering information
These devices consist of two independent,
high-gain, frequency-compensated operational
amplifiers designed to operate from a single
supply over a wide range of voltages. Operation
from split supplies also is possible if the difference
between the two supplies is 3 V to 30 V (3 V to
26 V for the LM2904 and LM2904Q), and V
CC
is
at least 1.5 V more positive than the input
common-mode voltage. The low supply-current
drain is independent of the magnitude of the
supply voltage.
Applications include transducer amplifiers, dc amplification blocks, and all the conventional operational
amplifier circuits that now can be implemented more easily in single-supply-voltage systems. For example,
these devices can be operated directly from the standard 5-V supply used in digital systems and easily provide
the required interface electronics without additional ±5-V supplies.
The LM2904Q is manufactured to demanding automotive requirements.
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
Copyright 2002, Texas Instruments Incorporated
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
1
2
3
4
8
7
6
5
1OUT
1IN–
1IN+
GND
V
CC
2OUT
2IN–
2IN+
LM158, LM158A . . . JG PACKAGE
LM258 ...D OR P PACKAGE
LM258A ...P PACKAGE
LM358 . . . D, P, PS, OR PW PACKAGE
LM358A ...D OR P PACKAGE
LM2904 . . . D, P, PS, OR PW PACKAGE
LM2904Q . . . D PACKAGE
(TOP VIEW)
3212019
910111213
4
5
6
7
8
18
17
16
15
14
NC
2OUT
NC
2IN–
NC
NC
1IN–
NC
1IN+
NC
LM158, LM158A . . . FK PACKAGE
(TOP VIEW)
NC
1OUT
NC
NC
NC
NC
GND
NC
CC+
V
2IN+
NC – No internal connection
On products compliant to MIL-PRF-38535, all parameters are tested
unless otherwise noted. On all other products, production
processing does not necessarily include testing of all parameters.