Dual Channel 1°C Temperature Sensor with Beta Compensation and 1.8V SMBus Communications
Datasheet
Revision 1.0 (07-11-13) 10 SMSC EMC1182
DATASHEET
Chapter 3 Electrical Specifications
3.1 Absolute Maximum Ratings
Note: Stresses at or above those listed could cause permanent damage to the device. This is a stress
rating only and functional operation of the device at any other condition above those indicated
in the operation sections of this specification is not implied.
Note 3.1 For the 5V tolerant pins that have a pull-up resistor (SMCLK, SMDATA, THERM
, and
ALERT
/ THERM2), the pull-up voltage must not exceed 3.6V when the device is
unpowered.
3.2 Electrical Specifications
Table 3.1 Absolute Maximum Ratings
DESCRIPTION RATING UNIT
Supply Voltage (V
DD
) -0.3 to 4.0 V
Voltage on 5V tolerant pins (V
5VT_pin
) -0.3 to 5.5 V
Voltage on 5V tolerant pins (|V
5VT_pin
- V
DD
|) (see Note 3.1)0 to 3.6 V
Voltage on any other pin to Ground -0.3 to V
DD
+0.3 V
Operating Temperature Range -40 to +125 °C
Storage Temperature Range -55 to +150 °C
Lead Temperature Range Refer to JEDEC Spec. J-STD-020
Package Thermal Characteristics for TDFN-8
Thermal Resistance (θ
j-a
)89°C/W
ESD Rating, All pins HBM 2000 V
Table 3.2 Electrical Specifications
V
DD
= 3.0V to 3.6V, T
A
= -40°C to 125°C, all typical values at T
A
= 27°C unless otherwise noted.
CHARACTERISTIC SYMBOL MIN TYP MAX UNITS CONDITIONS
DC Power
Supply Voltage V
DD
3.0 3.3 3.6 V
Supply Current I
DD
200 410 µA 0.0625 conversion / sec, dynamic
averaging disabled
215 425 µA 1 conversion / sec, dynamic
averaging disabled
