Important notice
Dear Customer,
On 7 February 2017 the former NXP Standard Product business became a new company with the
tradename Nexperia. Nexperia is an industry leading supplier of Discrete, Logic and PowerMOS
semiconductors with its focus on the automotive, industrial, computing, consumer and wearable
application markets
In data sheets and application notes which still contain NXP or Philips Semiconductors references, use
the references to Nexperia, as shown below.
Instead of http://www.nxp.com, http://www.philips.com/ or http://www.semiconductors.philips.com/,
use http://www.nexperia.com
Instead of sales.addresses@www.nxp.com or sales.addresses@www.semiconductors.philips.com, use
salesaddresses@nexperia.com (email)
Replace the copyright notice at the bottom of each page or elsewhere in the document, depending on
the version, as shown below:
- © NXP N.V. (year). All rights reserved or © Koninklijke Philips Electronics N.V. (year). All rights
reserved
Should be replaced with:
- © Nexperia B.V. (year). All rights reserved.
If you have any questions related to the data sheet, please contact our nearest sales office via e-mail
or telephone (details via salesaddresses@nexperia.com). Thank you for your cooperation and
understanding,
Kind regards,
Team Nexperia
1. General description
74AHC1G07 and 74AHCT1G07 are high-speed Si-gate CMOS devices. They provide a
non-inverting buffer.
The output of these devices is open-drain and can be connected to other open-drain
outputs to implement active-LOW wired-OR or active-HIGH wired-AND functions. For
digital operation this device must have a pull-up resistor to establish a logic HIGH-level.
The AHC device has CMOS input switching levels and supply voltage range 2 V to 5.5 V.
The AHCT device has TTL input switching levels and supply voltage range 4.5 V to 5.5 V.
2. Features and benefits
High noise immunity
Low power dissipation
SOT353-1 and SOT753 package options
ESD protection:
HBM JESD22-A114E: exceeds 2000 V
MM JESD22-A115-A: exceeds 200 V
CDM JESD22-C101C: exceeds 1000 V
Specified from 40 C to +125 C
3. Ordering information
74AHC1G07; 74AHCT1G07
Buffer with open-drain output
Rev. 7 — 18 November 2014 Product data sheet
Table 1. Ordering information
Type number Package
Temperature range Name Description Version
74AHC1G07GW 40 C to +125 C TSSOP5 plastic thin shrink small outline package;
5 leads; body width 1.25 mm
SOT353-1
74AHCT1G07GW
74AHC1G07GV 40 C to +125 C SC-74A plastic surface-mounted package; 5 leads SOT753
74AHCT1G07GV
74AHC_AHCT1G07 All information provided in this document is subject to legal disclaimers. © NXP Semiconductors N.V. 2014. All rights reserved.
Product data sheet Rev. 7 — 18 November 2014 2 of 12
NXP Semiconductors
74AHC1G07; 74AHCT1G07
Buffer with open-drain output
4. Marking
[1] The pin 1 indicator is located on the lower left corner of the device, below the marking code.
5. Functional diagram
6. Pinning information
6.1 Pinning
6.2 Pin description
Table 2. Marking codes
Type number Marking
[1]
74AHC1G07GW AS
74AHC1G07GV A07
74AHCT1G07GW CS
74AHCT1G07GV C07
Fig 1. Logic symbol Fig 2. IEC logic symbol Fig 3. Logic diagram
PQD
$<
PQD
<
$
PQD
<
$
*1'
Fig 4. Pin configuration
$+&*
$+&7*
QF 9
&&
$
*1' <
DDI
Table 3. Pin description
Symbol Pin Description
n.c. 1 not connected
A 2 data input
GND 3 ground (0 V)
Y 4 data output
V
CC
5 supply voltage

74AHCT1G07GV,125

Mfr. #:
Manufacturer:
NXP Semiconductors
Description:
Buffers & Line Drivers HEX BUFFER/DRIVER
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union