204Pin DDR3L 1600 SO-DIMM
2GB Based on 256Mx8
AQD-SD3L2GN16-SQ
Description
AQD-SD3L2GN16-SQ is a DDR3 Unbuffered SO-DIMM,
non-ECC, high-speed, low power memory module that
use 8pcs of 256Mx8bits DDR3L low voltage SDRAM in
FBGA package and a 2048 bits serial EEPROM on a
204-pin printed circuit board. AQD-SD3L2GN16-SQ is a
Dual In-Line Memory Module and is intended for
mounting into 204-pin edge connector sockets.
Synchronous design allows precise cycle control with the
use of system clock. Data I/O transactions are possible
on both edges of DQS. Range of operation frequencies,
programmable latencies allow the same device to be
useful for a variety of high bandwidth, high performance
memory system applications.
Features
RoHS compliant products.
JEDEC standard 1.35V(1.28V~1.45V) Power supply
JEDEC standard 1.5V(1.425V~1.575V) Power supply
VDDQ=1.35V(1.28V~1.45V) & 1.5V(1.425V~1.575V)
Clock Freq: 800MHZ for 1600Mb/s/Pin.
Programmable CAS Latency: 5, 6, 7, 8, 9 ,10 ,11
Programmable Additive Latency (Posted /CAS):
0,CL-2 or CL-1 clock
Programmable /CAS Write Latency (CWL)
= 8(DDR3-1600)
8 bit pre-fetch
Burst Length: 4, 8
Bi-directional Differential Data-Strobe
Internal calibration through ZQ pin
On Die Termination with ODT pin
Serial presence detect with EEPROM
Asynchronous reset
Pin Identification
Pin Identification
Differential Data strobes
Clock Input. (Differential pair)
On-die termination control line
Data masks/high data strobes
Power Supply for Reference
I2C serial bus address select for
EEPROM
I2C serial bus clock for EEPROM
I2C serial bus data for EEPROM
SDRAM I/O termination supply
