4
FN6554.0
October 8, 2007
Absolute Maximum Ratings Thermal Information
Supply Voltage, V
DD
. . . . . . . . . . . . . . . . . . . GND - 0.3V to +20.0V
OUTA, OUTB . . . . . . . . . . . . . . . . . . . . . . . . . . . GND - 0.3V to V
DD
Signal Pins. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .GND - 0.3V to 5V
Peak GATE Current . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1A
ESD Classification
Human Body Model (Per MIL-STD-883 Method 3015.7) . . .2000V
Machine Model (Per EIAJ ED-4701 Method C-111). . . . . . . .100V
Charged Device Model (Per EOS/ESD DS5.3, 4/14/93) . . .1000V
Operating Conditions
Temperature Range
ISL6744AAxx . . . . . . . . . . . . . . . . . . . . . . . . . .-40°C to +105°C
Supply Voltage Range (Typical). . . . . . . . . . . . . . . 9VDC to 16VDC
Thermal Resistance (Typical, Note 1) θ
JA
(°C/W)
8 Lead MSOP. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 128
8 Lead SOIC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98
Maximum Junction Temperature . . . . . . . . . . . . . . .-55°C to +150°C
Maximum Storage Temperature Range. . . . . . . . . .-65°C to +150°C
Pb-free reflow profile . . . . . . . . . . . . . . . . . . . . . . . . . .see link below
http://www.intersil.com/pbfree/Pb-FreeReflow.asp
CAUTION: Do not operate at or near the maximum ratings listed for extended periods of time. Exposure to such conditions may adversely impact product reliability and
result in failures not covered by warranty.
NOTES:
1. θ
JA
is measured with the component mounted on a high effective thermal conductivity test board in free air. See Tech Brief TB379 for details.
2. All voltages are to be measured with respect to GND, unless otherwise specified.
Electrical Specifications Recommended operating conditions unless otherwise noted. Refer to Block Diagram and Typical Application
schematic. 9V < V
D
< 16V, R
TD
= 51.1kΩ, C
T
= 470pF, T
A
= -40°C to +105°C (Note 3), Typical values are at
T
A
= +25°C
PARAMETER TEST CONDITIONS MIN TYP MAX UNITS
SUPPLY VOLTAGE
Start-Up Current, I
DD
V
DD
< START Threshold - - 175 μA
Operating Current, I
DD
R
LOAD
, C
OUTA,B
= 0 - 2.89 - mA
C
OUTA,B
= 1nF - 5 8.5 mA
UVLO START Threshold 5.9 6.3 6.6 V
UVLO STOP Threshold 5.3 5.7 6.3 V
Hysteresis -0.6- V
CURRENT SENSE
Current Limit Threshold 0.55 0.6 0.65 V
CS to OUT Delay (Note 4) - 35 - ns
CS Sink Current 810-mA
Input Bias Current -1 - 1 μA
PULSE WIDTH MODULATOR
Minimum Duty Cycle V
ERROR
< C
T
Offset - - 0 %
Maximum Duty Cycle C
T
= 470pF, R
TD
= 51.1kΩ -94-%
C
T
= 470pF, R
TD
= 1.1kΩ (Note 4) - 99 - %
C
T
to SS Comparator Input Gain (Note 4) - 1 - V/V
SS to SS Comparator Input Gain (Note 4) - 0.8 - V/V
ISL6744A
