1. General description
The 74LVC273-Q100 has eight edge-triggered, D-type flip-flops with individual Dn inputs
and Qn outputs. The common clock (CP) and master reset (MR
) inputs load and reset
(clear) all flip-flops simultaneously. The state of each Dn input, one set-up time before the
LOW-to-HIGH clock transition, is transferred to the corresponding output (Qn) of the
flip-flop. All outputs are forced LOW independent of clock or data inputs by a LOW voltage
level on the MR
input.
The device is useful for applications where the true output only is required and the clock
and master reset are common to all storage elements.
This product has been qualified to the Automotive Electronics Council (AEC) standard
Q100 (Grade 1) and is suitable for use in automotive applications.
2. Features and benefits
Automotive product qualification in accordance with AEC-Q100 (Grade 1)
Specified from 40 C to +85 C and from 40 C to +125 C
Wide supply voltage range from 1.2 V to 3.6 V
Inputs accept voltages up to 5.5 V
CMOS low power consumption
Direct interface with TTL levels
Output drive capability 50 transmission lines at +85 C
Complies with JEDEC standard:
JESD8-7A (1.65 V to 1.95 V)
JESD8-5A (2.3 V to 2.7 V)
JESD8-C/JESD36 (2.7 V to 3.6 V)
ESD protection:
MIL-STD-883, method 3015 exceeds 2000 V
HBM JESD22-A114F exceeds 2000 V
MM JESD22-A115-A exceeds 200 V (C = 200 pF, R = 0 )
74LVC273-Q100
Octal D-type flip-flop with reset; positive-edge trigger
Rev. 1 — 16 September 2013 Product data sheet