OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

FCBP110LD1L30S

P1-P3P4-P6P7-P9
F i n i s a r
© Finisar Corporation April 2012 Rev. B3 Page 7
VIII. Mechanical Specifications
Figure 5. Side and Plug end-views.
Insertion, Extraction and Retention
Forces. Bend Radius
Min Max Units Notes
Cable Tensile Load (Short Term) 100 Newtons
Cable Tensile Load (Long Term) 100 Newtons
Crush Resistance 100 Newtons/mm FOTP-41
Impact Resistance 0.5 Newton·m FOTP-25
Flexing 300 Cycles FOTP-104
Twist Bend Exceeds FOTP-85
Cable to Laserwire Plug Connection 58 Newtons Same as SFP/SFP+
Bend Radius 10 mm
For details of the Laserwire™ Jack (P/N FCBJ110LE1) and recommended PCB layout and bezel
recommendations, please refer to the Laserwire™ Jack datasheet.
F i n i s a r
© Finisar Corporation April 2012 Rev. B3 Page 8
IX. LED Operation
Both ends
inserted, powered
End inserted, powered. Other end
does not appear inserted or powered.
End not inserted and/or no
power. No LED operation.
End inserted, powered. Other end
does not appear inserted or powered.
End not inserted and/or no
p
ower. No LED o
p
eration.
End not inserted and/or no
p
ower. No LED o
p
eration.
End not inserted and/or no
p
ower. No LED o
p
eration.
Both ends
inserted, powered
Figure 6. Laserwire LED operation.
The optical Laserwire LEDs are a physical layer indicator and do not indicate actual traffic flow.
A green light on both ends signifies that light, not traffic, is being transmitted by the laser in the
opposite end. A red light indicates that the laser in the opposite end is not functioning either
because it is not inserted and/or not powered. No LED operation signifies that the lasers in both
ends are not transmitting light because both ends are either not inserted and/or not powered.
F i n i s a r
© Finisar Corporation April 2012 Rev. B3 Page 9
X. Application Note of Recommended Host-Board Connections.
Figure 6. Recommended host board configuration showing power supply filtering, required AC-coupling
capacitors, and status pull-up resistors.
X. References
1. SFF-8077i rev 4.5 – XFP Specifications, SFF Committee, August 2005.
2. SFF-8431 rev 4.2 – SFP+ Specifications, SFF Committee, December 2007.
3. IEEE Std 802.3ae, 2002 Edition, IEEE Standards Department, 2002.
4. IEEE Std 802.3, 2002 Edition, IEEE Standards Department, 2002.
5. “Fibre Channel Physical and Signaling Interface (FC-PH, FC-PH2, FC-PH3)”. American
National Standard for Information Systems.
6. “Fibre Channel Physical Interface Specification (FC-PI-4 Rev. 6.1)”. American National
Standard for Information Systems.
XI. For More Information
Finisar Corporation
1389 Moffett Park Drive
Sunnyvale, CA 94089-1133
Tel. 1-408-548-1000
Fax 1-408-541-6138
sales@finisar.com
www.finisar.com
Laserwire
Jack
Laserwire
Cable Plug
P1-P3P4-P6P7-P9

FCBP110LD1L30S

Mfr. #:
Buy FCBP110LD1L30S
Manufacturer:
Finisar Corporation
Description:
Fiber Optic Cable Assemblies 1-10.5Gbps fullduplx Laserwire male conn
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet