KAI-2093-ABA-CB-B2 Datasheet KAI-2093-ABA-CB-B2, KAI-2093-AAA-CP-BA, KAI-2093-CBA-CB-BA | P1-P3

February, 2017 − Rev. 2

1 Publication Order Number:

KAI−2093/D

KAI-2093

1920 (H) x 1080 (V) Interline

CCD Image Sensor

Description

The KAI−2093 Image Sensor is a high−performance

multi−megapixel image sensor designed for a wide range of medical

imaging and machine vision applications.

The 7.4 mm square pixels with microlenses provide high sensitivity

and the large full well capacity results in high dynamic range. The split

horizontal register offers a choice of single or dual output allowing

either 15 or 30 frame per second (fps). The architecture allows for

either progressive scan or interlaced readout. The imager features 5 V

clocking to facilitate camera design. The vertical overflow drain

structure provides antiblooming protection, and enables electronic

shuttering for precise exposure control.

Table 1. GENERAL SPECIFICATIONS

Parameter Typical Value

Architecture Interline CCD, Progressive Scan or

Interlaced Readout

Total Number of Pixels 1984 (H) × 1092 (V)

Number of Effective Pixels 1928 (H) × 1084 (V)

Number of Active Pixels 1920 (H) × 1080 (V)

Pixel Size

7.4 mm (H) × 7.4 mm (V)

Active Image Size 14.208 mm (H) × 7.992 mm (V),

16.3 mm (Diagonal)

Aspect Ratio 16:9

Number of Outputs 1 or 2

Saturation Signal 40,000 e

−

Output Sensitivity

14 mV/e

−

Quantum Efficiency

−ABA (490 nm)

−CBA (R = 620 nm, G = 540 nm,

B = 460 nm)

40%

37%, 34%, 30%

Total Noise 40 e

−

rms

Dark Current (Typical) < 0.5 nA/cm

Dynamic Range 60 dB

Maximum Pixel Clock Speed 40 MHz

Blooming Suppression 100 X

Smear < 0.03%

Image Lag < 10 electrons

Frame Rate

Single Output, 20 MHz

Single Output, 35 MHz

Dual Output, 20 MHz

Dual Output, 37 MHz

9 fps

15 fps

17 fps

30 fps

Maximum Data Rate 40 MHz/Channel (2 Channels)

Package 32 pin CerDIP

Cover Glass Clear Glass or Quartz Glass with

AR Coating (2 sides)

NOTE: Parameters above are specified at T = 40°C unless otherwise noted.

Features

• Progressive Scan (Non−interlaced)

• HCCD and Output Amplifier Capable of

40 MHz Operation

• 5 V HCCD Clocking

• Single or Dual Video Output Operation

• 28 Light Shielded Reference Columns per

Output

• Only 2 Vertical CCD Clocks and 2

Horizontal CCD Clocks

• Electronic Shutter

• Low Dark Current

Applications

• Intelligent Transportation Systems

• Machine Vision

• Surveillance

www.onsemi.com

Figure 1. KAI−2093 Interline CCD

Image Sensor

See detailed ordering and shipping information on page 2 of

this data sheet.

ORDERING INFORMATION

KAI−2093

www.onsemi.com

ORDERING INFORMATION

Table 2. ORDERING INFORMATION − KAI−2093 IMAGE SENSOR

Part Number Description Marking Code

KAI−2093−AAA−CP−AE Monochrome, No Microlens, CERDIP Package (Sidebrazed),

Taped Clear Cover Glass (No Coatings), Engineering Sample

KAI−2093

Serial Number

KAI−2093−AAA−CP−BA Monochrome, No Microlens, CERDIP Package (Sidebrazed),

Taped Clear Cover Glass (No Coatings), Standard Grade

KAI−2093−ABA−CB−AE Monochrome, Telecentric Microlens, CERDIP Package (Sidebrazed),

Clear Cover Glass (No Coatings), Engineering Sample

KAI−2093M

Serial Number

KAI−2093−ABA−CB−B1 Monochrome, Telecentric Microlens, CERDIP Package (Sidebrazed),

Clear Cover Glass (No Coatings), Grade 1

KAI−2093−ABA−CB−B2 Monochrome, Telecentric Microlens, CERDIP Package (Sidebrazed),

Clear Cover Glass (No Coatings), Grade 2

KAI−2093−ABA−CK−AE Monochrome, Telecentric Microlens, CERDIP Package (Sidebrazed),

Quartz Cover Glass with AR Coating (Both Sides), Engineering Sample

KAI−2093−ABA−CK−BA Monochrome, Telecentric Microlens, CERDIP Package (Sidebrazed),

Quartz Cover Glass with AR Coating (Both Sides), Standard Grade

KAI−2093−ABA−CP−AE Monochrome, Telecentric Microlens, CERDIP Package (Sidebrazed),

Taped Clear Cover Glass (No Coatings), Engineering Sample

KAI−2093−ABA−CP−BA Monochrome, Telecentric Microlens, CERDIP Package (Sidebrazed),

Taped Clear Cover Glass (No Coatings), Standard Grade

KAI−2093−CBA−CB−AE Color (Bayer RGB), Telecentric Microlens, CERDIP Package (Sidebrazed),

Clear Cover Glass (No Coatings), Engineering Sample

KAI−2093CM

Serial Number

KAI−2093−CBA−CB−BA Color (Bayer RGB), Telecentric Microlens, CERDIP Package (Sidebrazed),

Clear Cover Glass (No Coatings), Standard Grade

Table 3. ORDERING INFORMATION − EVALUATION SUPPORT

Part Number Description

KAI−2093−10−40−A−EVK Evaluation Board, 10 Bit, 40 MHz (Complete Kit)

KAI−2093−12−20−A−EVK Evaluation Board, 12 Bit, 20 MHz (Complete Kit)

See the ON Semiconductor Device Nomenclature document (TND310/D) for a full description of the naming convention

used for image sensors. For reference documentation, including information on evaluation kits, please visit our web site at

www.onsemi.com

KAI−2093

www.onsemi.com

DEVICE DESCRIPTION

Architecture

Figure 2. Sensor Architecture

4 light shielded rows

2 buffer rows

4 buffer columns

1920 x 1080

imaging pixels

2 buffer rows

28 light shielded columns

4 buffer columns

4 empty pixels

Video L Video R

4 light shielded rows

28 light shielded columns

4 empty pixels

1920 4 2828 44

960 4 2828 44 4960

Single Output

Dual Output

There are 4 light shielded rows followed by 1084

photoactive rows and finally 4 more light shielded rows. The

first and last 2 photoactive rows are buffer rows giving a total

of 1080 lines of image data.

In the single output mode all pixels are clocked out of the

Video L output in the lower left corner of the sensor. The first

four empty pixels of each line do not receive charge from the

vertical shift register. The next 28 pixels receive charge from

the left light shielded edge followed by 1928 photoactive

pixels and finally 28 more light shielded pixels from the

right edge of the sensor. The first and last 4 photoactive

pixels are buffer pixels giving a total of 1920 pixels of image

data.

In the dual output mode the clocking of the right half of the

horizontal CCD is reversed. The left half of the image is

clocked out Video L and the right half of the image is clocked

out Video R. Each row consists of 4 empty pixels followed

by 28 light shielded pixels followed by 964 photoactive

pixels. When reconstructing the image, data from Video R

will have to be reversed in a line buffer and appended to the

Video L data.

P1-P3 P4-P6 P7-P9 P10-P12 P13-P15 P16-P18 P19-P21 P22-P24 P25-P26

KAI-2093-ABA-CB-B2

Mfr. #:

Buy KAI-2093-ABA-CB-B2

Manufacturer:

ON Semiconductor

Description:

Image Sensors INTERLINE CCD IMAGE SENSOR

Lifecycle:

New from this manufacturer.

Delivery:

DHL FedEx Ups TNT EMS

Payment:

T/T Paypal Visa MoneyGram Western Union

KAI-2093-ABA-CB-B2

KAI-2093-ABA-CB-B2

Products related to this Datasheet