Three-Phase Power MOSFET Controller
A3938
11
Allegro MicroSystems, LLC
115 Northeast Cutoff
Worcester, Massachusetts 01615-0036 U.S.A.
1.508.853.5000; www.allegromicro.com
LD Package, 38-pin TSSOP
1.20 MAX
4º
6.00
1.60
SEATING
PLANE
0.50
C0.10
38X
C
0.30
0.10 ±0.05
0.22 ±0.05
4.40 ±0.10
6.40 ±0.20
9.70 ±0.10
0.15
+0.06
–0.05
21
38
21
38
GAUGE PLANE
SEATING PLANE
A
A
Terminal #1 mark area
All dimensions nominal, not for tooling use
(reference JEDEC MO-153 BD-1)
Dimensions in millimeters
B
B
Reference pad layout (reference IPC SOP50P640X110-38M)
All pads a minimum of 0.20 mm from all adjacent pads; adjust as necessary
to meet application process requirements and PCB layout tolerances
PCB Layout Reference View
0.50
0.25
Copyright ©2003-2013, Allegro MicroSystems, LLC
Allegro MicroSystems, LLC reserves the right to make, from time to time, such de par tures from the detail spec i fi ca tions as may be required to
permit improvements in the per for mance, reliability, or manufacturability of its products. Before placing an order, the user is cautioned to verify that
the information being relied upon is current.
Allegro’s products are not to be used in life support devices or systems, if a failure of an Allegro product can reasonably be expected to cause the
failure of that life support device or system, or to affect the safety or effectiveness of that device or system.
The in for ma tion in clud ed herein is believed to be ac cu rate and reliable. How ev er, Allegro MicroSystems, LLC assumes no re spon si bil i ty for its
use; nor for any in fringe ment of patents or other rights of third parties which may result from its use.
For the latest version of this document, visit our website:
www.allegromicro.com