© Semiconductor Components Industries, LLC, 2007
October, 2007 - Rev. 0
1 Publication Order Number:
NLAS6233/D
NLAS6233
Audio DPDT Switch with
Noise Suppression
Description
The NLAS6233 is a DPDT switch featuring Popless noise
suppression circuitry designed to prevent pass through of undesirable
transient signals known as pops. Intended for audio systems within
portable applications, it provides protection against audible pops that
are generated when switching between two different audio sources,
such as an amplifier and a CODEC.
The NLAS6233 incorporates two double throw switches controlled
by a single select line which allows the system controller to
simultaneously switch between two sets of signal lines. The Popless
noise suppression circuitry controls the ON and OFF times that define
the time interval when switching between the normally open (NO) and
normally closed (NC) terminals. This allows any pops to be dissipated
within the system before the switch settles into a closed position.
The NLAS6233 operates off of a single supply voltage, V
CC
, and is
available in an ultra-thin UQFN10 package.
Features
•Popless Noise Suppression Circuitry
•OVT up to +4.5 V on Control Pin
•R
ON
< 0.5 Across BCC Range, Typical
•THD < 0.02 %, Typical
•Off Isolation = -70 dB, Typical
•Crosstalk Attenuation < -70 dB, Typical
•Ultra Small, Thin Package: 1.4 mm x 1.8 mm UQFN10
•This is a Pb-Free Device
Typical Applications
•Cell Phones, PDAs, MP3 and Other Portable Media Players
UQFN10
MU SUFFIX
CASE 488AT
See detailed ordering and shipping information in the package
dimensions section on page 8 of this data sheet.
ORDERING INFORMATION
MARKING
DIAGRAM
http://onsemi.com
AM = Specific Device Code
M = Date Code
G = Pb-Free Package
(Note: Microdot may be in either location)
1
AM MG
G