SLI-1000 FMK

www.sensirion.com Version 11 July 2016 7/8
6 Ordering Information
For OEM applications, the liquid flow meter can be
purchased in larger quantities without any additional
parts. For optimum performance, Sensirion
recommends using the SLI liquid flow meters in
combination with the SCC1 interface cables.
For laboratory use and technology evaluation, the
Liquid Flow Meter Kit SLI-XXXX can be ordered.
This laboratory-package contains:
Liquid Flow Meter SLI-XXXX
Fitting Material for 1/8’’ tubing
PC Software (Viewer & Data Export Tool)
SCC1-USB Sensor Cable with USB connector
for plug-and-play connection to a PC
SCC1-Analog Sensor Cable with 0-10 V voltage
output.
Table 9: Ordering information
Product
Article Number
SLI-0430 Liquid Flow Meter
1-100836-02
SLI-1000 Liquid Flow Meter
1-100835-01
SLI-2000 Liquid Flow Meter
1-100895-01
Flow Meter Kit SLI-0430
1-100893-01
Flow Meter Kit SLI-1000
1-100879-01
Flow Meter Kit SLI-2000
1-100894-01
Interface Cables:
SCC1-RS485 Sensor Cable Pigtail 2m
1-100804-01
SCC1-RS485 Sensor Cable Pigtail 5m
1-101122-01
SCC1-ANALOG Sensor Cable Pigtail 2m
1-101072-01
SCC1-ANALOG Sensor Cable Pigtail 10m
1-101219-01
SCC1-USB Sensor Cable 2m
1-101007-01
www.sensirion.com Version 11 July 2016 8/8
Important Notices
Warning, personal injury
Do not use this product as safety or emergency stop devices or in any
other application where failure of the product could result in personal
injury (including death). Do not use this product for applications other
than its intended and authorized use. Before installing, handling,
using or servicing this product, please consult the datasheet and
application notes. Failure to comply with these instructions could
result in death or serious injury.
If the Buyer shall purchase or use SENSIRION products for any unintended
or unauthorized application, Buyer shall defend, indemnify and hold
harmless SENSIRION and its officers, employees, subsidiaries, affiliates
and distributors against all claims, costs, damages and expenses, and
reasonable attorney fees arising out of, directly or indirectly, any claim of
personal injury or death associated with such unintended or unauthorized
use, even if SENSIRION shall be allegedly negligent with respect to the
design or the manufacture of the product.
ESD Precautions
The inherent design of this component causes it to be sensitive to
electrostatic discharge (ESD). To prevent ESD-induced damage and/or
degradation, take customary and statutory ESD precautions when handling
this product.
Warranty
SENSIRION warrants solely to the original purchaser of this product for a
period of 12 months (one year) from the date of delivery that this product
shall be of the quality, material and workmanship defined in SENSIRION’s
published specifications of the product. Within such period, if proven to be
defective, SENSIRION shall repair and/or replace this product, in
SENSIRION’s discretion, free of charge to the Buyer, provided that:
notice in writing describing the defects shall be given to SENSIRION
within fourteen (14) days after their appearance;
such defects shall be found, to SENSIRION’s reasonable satisfaction,
to have arisen from SENSIRION’s faulty design, material, or
workmanship;
the defective product shall be returned to SENSIRION’s factory at the
Buyer’s expense; and
the warranty period for any repaired or replaced product shall be
limited to the unexpired portion of the original period.
This warranty does not apply to any equipment which has not been installed
and used within the specifications recommended by SENSIRION for the
intended and proper use of the equipment. EXCEPT FOR THE
WARRANTIES EXPRESSLY SET FORTH HEREIN, SENSIRION MAKES
NO WARRANTIES, EITHER EXPRESS OR IMPLIED, WITH RESPECT TO
THE PRODUCT. ANY AND ALL WARRANTIES, INCLUDING WITHOUT
LIMITATION, WARRANTIES OF MERCHANTABILITY OR FITNESS FOR
A PARTICULAR PURPOSE, ARE EXPRESSLY EXCLUDED AND
DECLINED.
SENSIRION is only liable for defects of this product arising under the
conditions of operation provided for in the datasheet and proper use of the
goods. SENSIRION explicitly disclaims all warranties, express or implied,
for any period during which the goods are operated or stored not in
accordance with the technical specifications.
SENSIRION does not assume any liability arising out of any application or
use of any product or circuit and specifically disclaims any and all liability,
including without limitation consequential or incidental damages. All
operating parameters, including without limitation recommended
parameters, must be validated for each customer’s applications by
customer’s technical experts. Recommended parameters can and do vary
in different applications.
SENSIRION reserves the right, without further notice, (i) to change the
product specifications and/or the information in this document and (ii) to
improve reliability, functions and design of this product.
Copyright © 2001-2016, SENSIRION.
CMOSens
®
is a trademark of Sensirion
All rights reserved
CE, RoHS, REACH and WEEE Statement
The flow meters of the SLI series comply with requirements of the following
directives and regulations:
The device fully complies with norm EN 50081-2 (Emission Test
Series), EN 50082-2 (Immunity Test Series) and ESD protection when
used in combination with the SCC1-RS485 or SCC1-ANALOG Sensor
Cables.
EU Directive 1907/2006/EC concerning Registration, Evaluation,
Authorization and Restriction of Chemicals (REACH)
EU Directive 2002/96/EC on waste electrical and electronic equipment
(WEEE), OJ13.02.2003; esp. its Article 6 (1) with Annex II.
EU Directive 2002/65/EC on the restriction of certain hazardous
substances in electric and electronic equipment (RoHS), OJ01.01.2011
Headquarters and Subsidiaries
SENSIRION AG
Laubisruetistr. 50
CH-8712 Staefa ZH
Switzerland
phone: +41 44 306 40 00
fax: +41 44 306 40 30
info@sensirion.com
www.sensirion.com
Sensirion Inc., USA
phone: +1 805 409 4900
info-us@sensirion.com
www.sensirion.com
Sensirion Japan Co. Ltd.
phone: +81 3 3444 4940
info-jp@sensirion.com
www.sensirion.co.jp
Sensirion Korea Co. Ltd.
phone: +82 31 337 7700-3
info-kr@sensirion.com
www.sensirion.co.kr
Sensirion China Co. Ltd.
phone: +86 755 8252 1501
info-cn@sensirion.com
www.sensirion.com.cn
Sensirion Taiwan Co. Ltd.
info@sensirion.com
www.sensirion.com
To find your local representative, please visit www.sensirion.com/contact

SLI-1000 FMK

Mfr. #:
Manufacturer:
Sensirion
Description:
Multiple Function Sensor Development Tools Media Isolated Microfluidic Flow Meter Kit
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet