Data Sheet ADIS16006
Rev. C | Page 7 of 16
PIN CONFIGURATION AND FUNCTION DESCRIPTIONS
ADIS16006
TOP VIEW
(Not to Scale)
NC
COM
ST
V
CC
SCLK
CS
NC = NO CONNECT
XFILT
YFILT
NC
9
82
7
1
3
65
4
1012 11
TCS
DOUT
DIN
05975-006
Figure 6. Pin Configuration
Table 5. Pin Function Descriptions
Pin No. Mnemonic Description
1
TCS
Temperature Chip Select. Active low logic input. This input frames the serial data transfer for the temperature
sensor output.
2 DOUT Data Out, Logic Output. The conversion of the ADIS16006 is provided on this output as a serial data stream.
The bits are clocked out on the falling edge of the SCLK input.
3 DIN Data In, Logic Input. Data to be written into the control register of the ADIS16006 is provided on this input and
is clocked into the register on the rising edge of SCLK.
4 COM Common. Reference point for all circuitry on the ADIS16006.
5, 7 NC No Connect.
6 ST Self-Test Input. Active high logic input. Simulates a nominal 0.75 g test input for diagnostic purpose.
8 YFILT Y-Channel Filter Node. Used in conjunction with an optional external capacitor to band limit the noise
contribution from the accelerometer.
X-Channel Filter Node. Used in conjunction with an optional external capacitor to band limit the noise
contribution from the accelerometer.
10
CS
Chip Select. Active low logic input. This input provides the dual function of initiating the accelerometer
conversions on the ADIS16006 and framing the serial data transfer for the accelerometer output.
11 V
CC
Power Supply Input. The V
CC
range for the ADIS16006 is 3.0 V to 5.25 V.
Serial Clock, Logic Input. SCLK provides the serial clock for accessing data from the part and writing serial data to
the control register. This clock input is also used as the clock source for the conversion process of the ADIS16006.
