1.Operate with additional aluminum plate
aluminum plate(or the cabinet of the same size) on the bottom.The size of the suggested aluminum plate is shown
as below.And for optimizing thermal performance, the aluminum plate must have an even and smooth surface
In order to meet the“Derating Curve”and the “Static Characteristics” ,UHP-200A series must be installed onto an
Installation
2.For heat dissipation, at least 5cm installation distance around the PSU should be kept, shown as below:
UHP-200A series
200W Single Output with PFC Function
M3*4
380
380
3
unit:mm
5cm
5
cm
5
cm
5cm
5
cm
+V
+V
-V
-V
AC/N AC/L
(or coated with thermal grease), and UHP-200A series must be firmly mounted at the center of the aluminum plate.
File Name:UHP-200A-SPEC 2018-01-09
