1
Programmable V
COM
Calibrator with EEPROM and
Output Buffer
ISL24212
The ISL24212 is an 8-bit programmable current sink that can be
used in conjunction with an external voltage divider to generate a
voltage source (V
COM
) positioned between the analog supply
voltage and ground. The current sink’s full-scale range is
controlled by an external resistor, R
SET
. With the appropriate
choice of external resistors R
1
and R
2
, the V
COM
voltage range
can be controlled between any arbitrary voltage range. The
ISL24212 has an 8-bit data register and 8-bit EEPROM for storing
both a volatile and a permanent value for its output, accessible
through a single up/down counter interface pin (CTL). After the
part is programmed with the desired V
COM
value, the Counter
Enable pin (CE) can be grounded to prevent further changes. On
every power-up, the EEPROM contents are automatically
transferred to the data register and the pre-programmed output
voltage appears at the VCOM_OUT pin.
The ISL24212 also features an integrated, wide-bandwidth, high
output drive buffer amplifier that can directly drive the V
COM
input of an LCD panel.
The ISL24212 is available in an 10 Ld 3mm x 3mm TDFN
package. This package has a maximum height of 0.8mm for very
low profile designs. The ambient operating temperature range is
-40°C to +85°C
.
Features
• Adjustable 8-bit, 256-Step, Current Sink Output
•60MHz V
COM
Buffer/Amplifier
• On-Chip 8-Bit EEPROM
• Up/Down Counter Interface
• Guaranteed Monotonic Over-Temperature
• 4.5V to 19.0V Analog Supply Range for Normal Operation
(10.8V Minimum Analog Supply Voltage for Programming)
• 2.25V to 3.6V Logic Supply Voltage Operating Range
• Pb-free (RoHS-compliant)
• Ultra-Thin 10 Ld TDFN (3x3x0.8mm max)
Applications
•LCD Panel V
COM
Generator
• Electrophoretic Display V
COM
Generator
Related Literature
• See Application Note “ISL24212IRTZ-EVALZ Evaluation Board
User Guide” (Coming Soon)
MICRO-
CONTROLLER
ISL24212
CE
CTL
DVR_OUT
SET
V
DD
AV
DD
9
6
5
8
7
2
3
R
SET
R
1
R
2
LCD PANEL
V
COM
I/O PIN
VCOM_OUT
10
IN
N
1
I/O PIN*
* 0, 1, TRISTATE
FIGURE 1. TYPICAL ISL24212 APPLICATION
March 15, 2011
FN7590.0
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 1-888-468-3774
|Copyright Intersil Americas Inc. 2011. All Rights Reserved
Intersil (and design) is a trademark owned by Intersil Corporation or one of its subsidiaries.
All other trademarks mentioned are the property of their respective owners.