MCT0603MD1000BP100

MCS 0402 AT, MCT 0603 AT, MCU 0805 AT, MCA 1206 AT - Precision
www.vishay.com
Vishay Beyschlag
Revision: 21-Feb-17
1
Document Number: 28785
For technical questions, contact: thinfilmchip@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Precision Thin Film Chip Resistors
Automotive-grade MC AT precision thin film chip resistors
are the perfect choice for most fields of modern
precision electronics where reliability and stability is of major
concern. Typical applications include automotive,
telecommunication, industrial, medical equipment,
precision test, and measuring equipment.
FEATURES
Rated dissipation P
70
up to 0.4 W for size 1206
AEC-Q200 qualified
Approved to EN 140401-801
Superior temperature cycling robustness
Advanced sulfur resistance verified according
to ASTM B 809
Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
APPLICATIONS
Automotive
Telecommunication
Industrial equipment
Medical equipment
Note
(1)
Please refer to APPLICATION INFORMATION below.
TECHNICAL SPECIFICATIONS
DESCRIPTION MCS 0402 AT MCT 0603 AT MCU 0805 AT MCA 1206 AT
Imperial size 0402 0603 0805 1206
Metric size code RR1005M RR1608M RR2012M RR3216M
Resistance range 47 to 221 k 47 to 511 k 47 to 1 M 47 to 1 M
Resistance tolerance ± 0.1 %
Temperature coefficient ± 25 ppm/K; ± 15 ppm/K; ± 10 ppm/K
Rated dissipation P
70
(1)
0.100 W 0.125 W 0.200 W 0.400 W
Operating voltage, U
max.
AC
RMS
/DC 50 V 75 V 150 V 200 V
Permissible film temperature,
F max.
(1)
155 °C
Operating temperature range -55 °C to 155 °C
Permissible voltage against ambient
(insulation):
1 min; U
ins
75 V 100 V 200 V 300 V
Failure rate: FIT
observed
0.1 x 10
-9
/h
MCS 0402 AT, MCT 0603 AT, MCU 0805 AT, MCA 1206 AT - Precision
www.vishay.com
Vishay Beyschlag
Revision: 21-Feb-17
2
Document Number: 28785
For technical questions, contact: thinfilmchip@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
APPLICATION INFORMATION
When the resistor dissipates power, a temperature rise above the ambient temperature occurs, dependent on the thermal
resistance of the assembled resistor together with the printed circuit board. The rated dissipation applies only if the permitted
film temperature is not exceeded.
These resistors do not feature a limited lifetime when operated within the permissible limits. However, resistance value drift
increasing over operating time may result in exceeding a limit acceptable to the specific application, thereby establishing a
functional lifetime.
Note
The presented operation modes do not refer to different types of resistors, but actually show examples of different loads, that lead to
different film temperatures and different achievable load-life stability (drift) of the resistance value. A suitable low thermal resistance of the
circuit board assembly must be safeguarded in order to maintain the film temperature of the resistors within the specified limits. Please
consider the application note “Thermal Management in Surface-Mounted Resistor Applications” (www.vishay.com/doc?28844
) for
information on the general nature of thermal resistance.
MAXIMUM RESISTANCE CHANGE AT RATED DISSIPATION
OPERATION MODE STANDARD POWER
Rated dissipation, P
70
MCS 0402 AT 0.063 W 0.100 W
MCT 0603 AT 0.100 W 0.125 W
MCU 0805 AT 0.125 W 0.200 W
MCA 1206 AT 0.250 W 0.400 W
Operating temperature range -55 °C to 125 °C -55 °C to 155 °C
Permissible film temperature,
F max.
125 °C 155 °C
Max. resistance change at P
70
for resistance range, |R/R| after:
MCS 0402 AT 47 to 221 k 47 to 221 k
MCT 0603 AT 47 to 511 k 47 to 511 k
MCU 0805 AT 47 to 1 M 47 to 1 M
MCA 1206 AT 47 to 1 M 47 to 1 M
1000 h 0.1 % 0.2 %
8000 h 0.2 % 0.4 %
225 000 h 0.6 % -
TEMPERATURE COEFFICIENT AND RESISTANCE RANGE
TYPE / SIZE TCR TOLERANCE RESISTANCE E-SERIES
MCS 0402 AT
± 25 ppm/K
± 0.1 %
47 to 221 k
E24; E192± 15 ppm/K 47 to 100 k
± 10 ppm/K 47 to 10 k
MCT 0603 AT
± 25 ppm/K
± 0.1 %
47 to 511 k
E24; E192± 15 ppm/K 47 to 221 k
± 10 ppm/K 47 to 22.1 k
MCU 0805 AT
± 25 ppm/K
± 0.1 %
47 to 1 M
E24; E192± 15 ppm/K 47 to 332 k
± 10 ppm/K 47 to 33.2 k
MCA 1206 AT
± 25 ppm/K
± 0.1 %
47 to 1 M
E24; E192± 15 ppm/K 47 to 511 k
± 10 ppm/K 47 to 43.2 k
MCS 0402 AT, MCT 0603 AT, MCU 0805 AT, MCA 1206 AT - Precision
www.vishay.com
Vishay Beyschlag
Revision: 21-Feb-17
3
Document Number: 28785
For technical questions, contact: thinfilmchip@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Note
Products can be ordered using either the PART NUMBER or PRODUCT DESCRIPTION.
PACKAGING
TYPE / SIZE CODE QUANTITY
PACKAGING
STYLE
WIDTH PITCH
PACKAGING
DIMENSIONS
MCS 0402 AT
E1 1000
Paper tape acc.
IEC 60286-3,
Type 1a
8 mm
2 mm Ø 180 mm/7"E5 5000
E0 10 000
MCT 0603 AT
P1 1000
4 mm
Ø 180 mm/7"
P5 5000
PW 20 000 Ø 330 mm/13"
MCU 0805 AT
P1 1000
Ø 180 mm/7"
P5 5000
PW 20 000 Ø 330 mm/13"
MCA 1206 AT
P1 1000
Ø 180 mm/7"
P5 5000
PART NUMBER AND PRODUCT DESCRIPTION
Part Number: MCT0603MD4641BPW00
TYPE/SIZE VERSION TCR RESISTANCE TOLERANCE PACKAGING
MCS0402
MCT0603
MCU0805
MCA1206
M = AT
(Automotive)
F = ± 10 ppm/K
E = ± 15 ppm/K
D = ± 25 ppm/K
3 digit value
1 digit multiplier
Multiplier
9 = *10
-1
0 = *10
0
1 = *10
1
2 = *10
2
3 = *10
3
B = ± 0.1 % E1
E5
E0
P1
P5
PW
Product Description: MCT 0603-25 0.1 % AT PW 4K64
MCT 0603 -25 0.1 % AT PW 4K64
TYPE SIZE TCR TOLERANCE VERSION PACKAGING RESISTANCE
MCS
MCT
MCU
MCA
0402
0603
0805
1206
± 10 ppm/K
± 15 ppm/K
± 25 ppm/K
± 0.1 % AT =
Automotive
E1
E5
E0
P1
P5
PW
4K64 = 4.64 k
CT0603MD4M 41BPW006

MCT0603MD1000BP100

Mfr. #:
Manufacturer:
Vishay
Description:
Thin Film Resistors - SMD .125W 100ohms 0.1% 0603 SMD 25ppm
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union