OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

ISL9001AIRBZ-T

P1-P3P4-P6P7-P9P10-P12
1
FN6433.3
ISL9001A
LDO with Low I
SUPPLY
, High PSRR
ISL9001A is a high performance Low Dropout linear
regulator capable of sourcing 300mA current. It has a low
standby current and high-PSRR and is stable with output
capacitance of 1µF to 10µF with ESR of up to 200m.
The ISL9001A has a very high PSRR of 90dB and output
noise less than 30µV
RMS
. A reference bypass pin allows
connection of a noise-filtering capacitor for low-noise and
high-PSRR applications. When coupled with a no load
quiescent current of 25µA (typical), and 0.1µA shutdown
current, the ISL9001A is an ideal choice for portable wireless
equipment.
The ISL9001A provides a P
GOOD
signal with delay time
programmable through an external capacitor.
Several different fixed voltage outputs are standard. Output
voltage options for each LDO range from 1.5V to 3.3V. Other
output voltage options may be available upon request.
Pinout
ISL9001A
(8 LD DFN)
TOP VIEW
Features
• 300mA high performance LDO
• Excellent transient response to large current steps
• Excellent load regulation: <0.1% voltage change across
full range of load current
• High PSRR: 90dB @ 1kHz
• Wide input voltage capability: 2.3V to 6.5V
• Extremely low quiescent current: 25µA
• Low dropout voltage: typically 200mV @ 300mA
• Low output noise: typically 30µV
RMS
@ 100µA (1.5V)
• Stable with 1µF to 10µF ceramic capacitors
• Soft-start to limit input current surge during enable
• Current limit and overheat protection
• Delayed POR, programmable with external capacitor
• ±1.8% accuracy over all operating conditions
• Tiny 2mmx3mm 8 Ld DFN package
• -40°C to +85°C operating temperature range
• Pb-free (RoHS compliant)
Applications
• PDAs, cell phones and smart phones
• Portable instruments, MP3 players
• Handheld devices, including medical handhelds
VIN
EN
CBYP
CPOR
VO
POR
NC
GND
2
3
4
1
7
6
5
8
Data Sheet December 10, 2015
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 1-888-468-3774
| Intersil (and design) is a trademark of Intersil Americas Inc.
Copyright Intersil Americas LLC 2007, 2008, 2015. All Rights Reserved
All other trademarks mentioned are the property of their respective owners.
2
FN6433.3
December 10, 2015
Ordering Information
PART NUMBER
(Notes 1, 2) PART MARKING
VO VOLTAGE (V)
(Note 3)
TEMP
RANGE (°C)
PACKAGE
Tape and Reel
(Pb-free)
PKG.
DWG. #
ISL9001AIRBZ-T EBB 1.5 -40 to +85 8 Ld 2x3 DFN L8.2x3
ISL9001AIRCZ-T EBC 1.8 -40 to +85 8 Ld 2x3 DFN L8.2x3
ISL9001AIRFZ-T EBD 2.5 -40 to +85 8 Ld 2x3 DFN L8.2x3
ISL9001AIRJZ-T EBE 2.8 -40 to +85 8 Ld 2x3 DFN L8.2x3
ISL9001AIRKZ-T EBF 2.85 -40 to +85 8 Ld 2x3 DFN L8.2x3
ISL9001AIRLZ-T (No longer
available or supported,
recommended part:
ISL9005AIRKZ-T)
EBG 2.9 -40 to +85 8 Ld 2x3 DFN L8.2x3
ISL9001AIRNZ-T EBJ 3.3 -40 to +85 8 Ld 2x3 DFN L8.2x3
NOTES:
1. These Intersil Pb-free plastic packaged products employ special Pb-free material sets; molding compounds/die attach materials and 100% matte
tin plate PLUS ANNEAL - e3 termination finish, which is RoHS compliant and compatible with both SnPb and Pb-free soldering operations.
Intersil Pb-free products are MSL classified at Pb-free peak reflow temperatures that meet or exceed the Pb-free requirements of IPC/JEDEC
J STD-020.
2. Please refer to TB347 for details on reel specifications
3. For other output voltages, contact Intersil Marketing.
ISL9001A
3
FN6433.3
December 10, 2015
Absolute Maximum Ratings Thermal Information
Supply Voltage (VIN) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . +7.1V
VO Pin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . +3.6V
All Other Pins . . . . . . . . . . . . . . . . . . . . . . . . . . -0.3 to (VIN + 0.3)V
Recommended Operating Conditions
Ambient Temperature Range (T
A
) . . . . . . . . . . . . . . .-40°C to +85°C
Supply Voltage (VIN) . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.3V to 6.5V
Thermal Resistance (Notes 4, 5)
JA
(°C/W)
JC
(°C/W)
8 Ld 2x3 DFN Package . . . . . . . . . . . . 69 10
Junction Temperature Range . . . . . . . . . . . . . . . . .-40°C to +125°C
Operating Temperature Range . . . . . . . . . . . . . . . . .-40°C to +85°C
Storage Temperature Range . . . . . . . . . . . . . . . . . .-65°C to +150°C
Pb-free reflow profile . . . . . . . . . . . . . . . . . . . . . . . . . .see link below
http://www.intersil.com/pbfree/Pb-FreeReflow.asp
CAUTION: Do not operate at or near the maximum ratings listed for extended periods of time. Exposure to such conditions may adversely impact product reliability and
result in failures not covered by warranty.
NOTES:
4.
JA
is measured in free air with the component mounted on a high effective thermal conductivity test board with “direct attach” features. See
Tech Brief TB379.
5. For
JC
, the “case temp” location is the center of the exposed metal pad on the package underside.
Electrical Specifications Unless otherwise noted, all parameters are guaranteed over the operational supply voltage and temperature
range of the device as follows: T
A
= -40°C to +85°C; V
IN
= (V
O
+ 0.5V) to 5.5V with a minimum V
IN
of 2.3V;
C
IN
= 1µF; C
O
= 1µF.
PARAMETER SYMBOL TEST CONDITIONS
MIN
(Note 7) TYP
MAX
(Note 7) UNITS
DC CHARACTERISTICS
Supply Voltage V
IN
2.3 6.5 V
Ground Current Quiescent condition: I
O
= 0µA
I
DD
LDO active 25 32 µA
Shutdown Current I
DDS
LDO disabled @ +25°C 0.1 1.0 µA
UVLO Threshold V
UV+
1.9 2.1 2.3 V
V
UV-
1.6 1.8 2.0 V
Regulation Voltage Accuracy Initial accuracy at V
IN
= V
O
+ 0.5V, I
O
= 10mA, T
J
= +25°C -0.7 +0.7 %
V
IN
= V
O
+ 0.5V to 5.5V, I
O
= 10µA to 300mA, T
J
= +25°C -0.8 +0.8 %
V
IN
= V
O
+ 0.5V to 5.5V, I
O
= 10µA to 300mA,
T
J
= -40°C to +125°C
-1.8 +1.8 %
Maximum Output Current I
MAX
Continuous 300 mA
Internal Current Limit I
LIM
350 475 600 mA
Dropout Voltage (Note 6) V
DO1
I
O
= 300mA; V
O
2.5V 300 500 mV
V
DO2
I
O
= 300mA; 2.5V V
O
2.8V 250 400 mV
V
DO3
I
O
= 300mA; V
O
> 2.8V 200 325 mV
Thermal Shutdown Temperature T
SD+
145 °C
T
SD-
110 °C
AC CHARACTERISTICS
Ripple Rejection I
O
= 10mA, V
IN
= 2.8V (min), V
O
= 1.8V, C
BYP
= 0.1µF
@ 1kHz 90 dB
@ 10kHz 70 dB
@ 100kHz 50 dB
Output Noise Voltage I
O
= 100µA, V
O
= 1.5V, T
A
= +25°C, C
BYP
= 0.1µF
BW = 10Hz to 100kHz
30 µV
RMS
ISL9001A
P1-P3P4-P6P7-P9P10-P12

ISL9001AIRBZ-T

Mfr. #:
Buy ISL9001AIRBZ-T
Manufacturer:
Renesas / Intersil
Description:
LDO Voltage Regulators W/ANNEAL SINGLELDO LW IQ HI PSRR 1 5V
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet