HFBR-0508Z Series
HFBR-1528Z Transmitter
HFBR-2528Z Receiver
10 Megabaud Versatile Link Fiber Optic Transmitter
and Receiver for 1 mm POF and 200 μm HCS
®
Data Sheet
Features
RoHS-compliant
Data transmission at signal rates of dc to 10 MBd
Up to 50 meters distances with 1 mm Plastic Optical
Fiber (POF)
Up to 500 meters distances with 200 μm Hard Clad
Silica (HCS
)
Wide dynamic range receiver allows operation from
zero to maximum link distance with a single transmit-
ter drive current
Link distances speci ed for variations in temperature,
power supply, and ber attenuation
DC coupled receiver with CMOS/TTL output for easy
designs: No data encoding or digitizing circuitry re-
quired
Pulse width distortion (PWD) controlled to limit dis-
tortion from low duty cycle or burst mode data
High noise immunity
Compatible with Avago’s versatile link family of con-
nectors, for easy termination of ber
Applications
Industrial control and factory automation
Serial eld buses
Intra-system links; board-to-board, rack-to-rack
Extension of RS-232, RS-485
Elimination of ground loops
High voltage isolation
Reduces voltage transient susceptibility
CAUTION: It is advised that normal static precautions be taken in handling and assembly of
these components to prevent damage and/or degradation which may be induced by ESD.
HCS
is a registered trademark of OFS.
Description
The HFBR-0508Z Series consists of a ber-optic trans-
mitter and receiver operating at a 650 nm wavelength
(red). The HFBR-1528Z transmitter is an LED in a low cost
plastic housing designed to e ciently couple power
into 200 μm diameter Hard Clad Silica (HCS
) and 1 mm
diameter Plastic optical ber (POF). The HFBR-2528Z re-
ceiver incor porates a PIN detec tor and digital output IC
compat ible with CMOS and TTL logic families.
HFBR-0508Z links operate from DC to 10 MBd at dis-
tances up to 50 meters with 1 mm POF and up to 500
meters with 200 μm HCS
. No minimum link distances
are required when using recom mended circuits, simpli-
fying design.
Versatile Link components can be interlocked (N-plexed
together) to minimize space and to provide dual connec-
tions with the duplex connectors. Up to eight packages
can be interlocked and inserted into a printed circuit
board.
POF and HCS
are available in pre-connectored lengths
or can be easily eld-terminated. A single transmitter
drive current for POF and HCS
allows both bers to be
used with a single design.