MP20051 – LOW NOISE HIGH PSRR 1A LINEAR REGULATOR
MP20051 Rev.1.2 www.MonolithicPower.com 4
3/17/2017 MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited.
© 2017 MPS. All Rights Reserved.
ELECTRICAL CHARACTERISTICS
V
IN
=V
OUT
+0.5V or V
IN
=2.5V, EN=V
IN
, Typical values are at T
A
=25°C, unless otherwise specified
Parameter Condition Min Typ Max Units
Input Voltage 2.5 5.5 V
Input Under Voltage Lockout V
IN
rising 1.95 2.25 V
Hysteresis of UVLO 160 mV
FB Voltage V
OUT
=0.8V, I
OUT
=1mA 0.784 0.8 0.816 V
Output Voltage Accuracy
I
OUT
=1mA, T
A
=25°C -2 2
%
I
OUT
=1mA, -40T
A
85°C -3 3
Maximum Output Current Continuous, V
IN
2.5V, V
OUT
=2.5V 1 A
Short-Circuit Current Limit V
OUT
=0, V
IN
2.5V 1.6 A
In-Regulation Current Limit
V
OUT
=2.5V, V
OUT
within 4% of normal
output voltage V
IN
=5.5V
1.4 2.2 3.0 A
Ground Current
I
OUT
=0.1mA, V
OUT
=2.5V 110
μA
I
OUT
=1A, V
OUT
=2.5V 600
Dropout Voltage
(6)
I
OUT
=1A, V
OUT
=2.5V 140 280
mV
I
OUT
=750m, V
OUT
=2.5V 105 210
I
OUT
=500mA, V
OUT
=2.5V 70 140
Line Regulation
(7)
V
OUT
=2.5V, V
IN
from V
OUT
+0.5V to
5.5V, I
OUT
=100mA,
-0.15 0.15 %/V
Load Regulation
(8)
I
OUT
from 100mA to 1A, V
OUT
=2.5V 0.3 %
Output Voltage Noise
I
OUT
=100mA, f ranges
from 10Hz to 100kHz
V
OUT
=1.1V 13
μV
RMS
V
OUT
=3.3V 35
V
OUT
=5V 55
PSRR
V
IN
= 2.5V, V
OUT
= 1.1V,
I
OUT
= 1A
f=100Hz 65
dB
f=1kHz 63
f=10kHz 63
f=1MHz 33
Shutdown Supply Current V
IN
=+5.5V 0.2 μA
EN Pin Current , Enabled V
IN
=V
EN
=+5.5V 0.2 μA
Feedback Pin Current V
IN
=+5.5V, V
FB
=6V 0.02 μA
Startup Time
V
OUT(NOM)
=2.5V, C
OUT
=4.7μF,
V
OUT
=0% to 90%V
OUT
(
NOM
)
45 μs
EN PIN Threshold
EN Logic High 1.5
V
EN Logic Low 0.4
Thermal Shutdown Temperature Typical thermal hysteresis =20°C 150 °C
Notes:
6) Dropout Voltage is defined as the input to output differential when the output voltage drops 100mV below its nominal value.
7) Line Regulation=

IN(MAX ) IN(MIN )
OUT V OUT V
IN(MIN) OUT(NOM)
IN MAX
VV
(% / V)
VV V





8) Load Regulation=

OUT(MAX) OUT(MIN)
OUT I OUT I
OUT NOM
VV
(%)
V


MP20051 – LOW NOISE HIGH PSRR 1A LINEAR REGULATOR
MP20051 Rev.1.2 www.MonolithicPower.com 5
3/17/2017 MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited.
© 2017 MPS. All Rights Reserved.
PIN FUNCTIONS
Pin # Name Pin Function
1, 2 VOUT
Regulator output. Bypass with a standard 4.7μF ceramic capacitor to GND. Connect all
the pins together externally.
3 FB
Feedback Input. Connect FB to the center point of the external resistor divider. The
feedback threshold voltage is 0.8V.
4
GND
Exposed pad
Ground. Connect exposed pad to GND plane for optimal thermal performance.
5 EN
Regulator Enable Control Input. Drive EN above 1.5V to turn on the MP20051. Drive EN
below 0.4V to turn it off. Do not float the EN pin.
6 NC No Connection. Leave this NC pin open.
7, 8 VIN
Regulator Input. Supply voltage ranges from 2.5V to 5.5V. Bypass with 2.2μF capacitor.
These pins must be externally connected for proper operation even if they are internally
connected.
MP20051 – LOW NOISE HIGH PSRR 1A LINEAR REGULATOR
MP20051 Rev.1.2 www.MonolithicPower.com 6
3/17/2017 MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited.
© 2017 MPS. All Rights Reserved.
TYPICAL PERFORMANCE CHARACTERISTICS
V
IN
= 2.5V, V
OUT
= 1.1V, C
IN
=2.2µF, C
OUT
=4.7µF, T
A
= 25°C, unless otherwise noted.
Quiescent Current vs.
Input Voltage
I
OUT
=0A
Dropout Voltage vs.
Temperature
V
OUT
=2.5V, I
OUT
=1A
EN threshold vs.
Input Voltage
EN threshold vs.
Temperature
Dropout Voltage vs.
Output Current
V
OUT
=2.5V
Current Limit vs.
Input Voltage
Line Regulation
I
OUT
=0mA and 100mA
Current Limit vs.
Temperature
Quiescent Current vs.
Temperature
I
OUT
=0A
0
20
40
60
80
100
120
140
-40 -20 0 20 40 60 80 100
0
20
40
60
80
100
120
140
160
3 3.5 4 4.5 5 5.5 6
INPUT VOLTAGE(V)
0
20
40
60
80
100
120
140
160
180
200
-40 -20 0 20 40 60 80 100
DROPOUT VOLTAGE(mV)
0
20
40
60
80
100
120
140
160
180
0 200 400 600 800 1000
OUTPUT CURRENT(mA)
DROPOUT VOLTAGE(mV)
0.4
0.5
0.6
0.7
0.8
0.9
1
1.1
1.2
2.5 3 3.5 4 4.5 5 5.5
INPUT VOLTAGE(V)
V
EN
(V)
V
EN
(V)
0.4
0.45
0.5
0.55
0.6
0.65
0.7
0.75
-40 -20 0 20 40 60 80 100
EN high threshold
EN low threshold
EN high threshold
EN low threshold
1.5
1.55
1.6
1.65
1.7
1.75
1.8
-40 -20 0 20 40 60 80 100
CURRENT LIMIT(A)
1.5
1.55
1.6
1.65
1.7
1.75
1.8
2.5 3 3.5 4 4.5 5 5.5
INPUT VOLTAGE(V)
CURRENT LIMIT(A)
-0.3
-0.2
-0.1
0
0.1
0.2
0.3
3 3.5 4 4.5 5 5.5 6
INPUT VOLTAGE(V)
I
OUT
=100mA
I
OUT
=0mA

MP20051DQ-LF-Z

Mfr. #:
Manufacturer:
Monolithic Power Systems (MPS)
Description:
LDO Voltage Regulators Low Noise High PSRR 1A Linear Regulator
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet