HFBR-RTD001 Datasheet HFBR-RLS010Z, HFBR-END035, HFBR-QUS500Z | P1-P3

Features

• Compatible with Avago Versatile Link Family of con-

nectors and ber optic components

• 1 mm diameter Plastic Optical Fiber (POF) in two

grades: low cost standard POF with 0.22 dB/m typical

attenuation, or high performance extra low loss POF

with 0.19 dB/m typical attenuation

Applications

• Industrial data links for factory automation and plant

control

• Intra-system links; board-to-board, rack-to-rack

• Telecommunications switching systems

• Computer-to-peripheral data links, PC bus extension

• Proprietary LANs

• Digitized video

• Medical instruments

• Reduction of lightning and voltage transient suscep-

tibility

• High voltage isolation

Figure 1. Typical POF attenuation vs. wavelength.

– ATTENUATION – dB/km

620

500

100

λ – WAVELENGTH – nm

660

300

HFBR-RXXYYY fig p2

400

680640 700

200

Cable Description

The HFBR-R/EXXYYYZ series of plastic ber optic cables

are constructed of a single step-index ber sheathed

in a black polyethylene jacket. The duplex ber consists

of two simplex bers joined with a zipcord web.

Standard attenuation and extra low loss POF cables are

identical except for attenuation specications.

Polyethylene jackets on all plastic ber cables com-

ply with UL VW-1 ame retardant specication (UL le

# E89328).

Cables are available in unconnectored or connectored

options. Refer to the Ordering Guide for part number

information.

HFBR-RXXYYYZ Series (POF)

HFBR-EXXYYYZ Series (POF)

Plastic Optical Fiber Cable and Accessories

for Versatile Link

Data Sheet

Notes:

1. Installation temperature is the range over which the cable can be bent and pulled without damage. Below -20°C the cable becomes brittle

and should not be subjected to mechanical stress.

2. Short Term Tensile Force is for less than 30 minutes.

3. Short Term Bend Radius is for less than 1 hour nonoperating.

4. 90° bend on 25 mm radius mandrel. Bend radius is the radius of the mandrel around which the cable is bent.

5. Typical data are at 25°C.

6. Propagation delay constant is the reciprocal of the group velocity for propagation delay of optical power. Group velocity is v=c/n where c is

the velocity of light in free space (3xl0

m/s) and n is the eective core index of refraction.

7. Note that α

rises at the rate of about 0.0067 dB/°C, where the thermal rise refers to the LED temperature changes above 25°C. Please refer to

Figure 1 which shows the typical plastic optical ber attenuation versus wavelength at 25°C.

Mechanical/Optical Characteristics, T

= -40 to +85°C unless otherwise specied.

Parameter Symbol Min. Typ.

[5]

Max. Unit Condition

Cable Standard Cable, α

0.15 0.22 0.27 dB/m Source is HFBR-15XX

Attenuation Type "R" (660 mm LED, 0.5 NA)

Extra Low Loss, 0.15 0.19 0.23 = 50 meters

Type "E"

Reference Standard Cable, α

0.12 0.19 0.24 dB/m Source is 650 nm,

Attenuation Type "R" 0.5 NA monochrometer,

Extra Low Loss, 0.12 0.16 0.19 = 50 meters

Type "E" Note 7, Figure 1

Numerical Aperture NA 0.46 0.47 0.50 >2 meters

Diameter, Core and Cladding D

0.94 1.00 1.06 mm

Diameter, Jacket D

2.13 2.20 2.27 mm Simplex Cable

Propagation Delay Constant l/v 5.0 ns/m Note 6

Mass per Unit Length/Channel 5.3 g/m Without Connectors

Cable Leakage Current I

12 nA 50 kV, = 0.3 meters

Refractive Index Core n 1.492

Cladding 1.417

Plastic Optical Fiber Specications: HFBR-R/EXXYYYZ

Absolute Maximum Ratings

Parameter Symbol Min. Max. Unit Note

Storage and Operating Temperature T

S,O

-55 +85 °C

Recommended Operating Temperature T

-40 +85 °C

Installation Temperature T

-20 +70 °C 1

Short Term Tensile Single Channel F

50 N 2

Dual Channel F

100 N

Short Term Bend Radius r 25 mm 3, 4

Long Term Bend Radius r 35 mm

Long Term Tensile Load F

1 N

Flexing 1000 Cycles 4

Force

HFBR-4526Z

, HFBR-4525Z

HFBR-4525Z

Plastic Fiber Connector Styles

Connector Description

Four connector styles are available for termination of plastic

optical ber: simplex, simplex latching, duplex and duplex

latching. All connectors provide a snap-in action when

mated to Versatile Link components. Simplex connectors

are color coded to facilitate identication of transmitter

and receiver connections. Duplex connectors are keyed

so that proper orientation is ensured during insertion. If

the POF cable/connector will be used at extreme operat-

ing temperatures or experience frequent and wide tem-

perature cycling eects, the cable/connector attachment

can be strengthened with an RTV adhesive (see Plastic

Connectoring Instructions for more detail). The connectors

are made of a ame retardant VALOX UL94 V-0 material

(UL le # E121562).

SIMPLEX CONNECTOR STYLES

HFBR-4501Z/4511Z – Simplex

DUPLEX CONNECTOR STYLES

HFBR-4506Z – Duplex

The simplex connector provides a quick and stable con-

nection for applications that require a component-to-

connector retention force of 8 Newtons (1.8 lb.). These

connectors are available in gray (HFBR-4501Z) or blue

(HFBR-4511Z).

HFBR-4503Z/4513Z – Simplex Latching

The simplex latching connector is designed for rugged

applications requiring a greater retention force — 80 New-

tons ( 18 lb.) — than provided by a simplex nonlatching

connector. When inserting the simplex latching connector

into a module, the connector latch mechanism should be

aligned with the top surface of the horizontal modules,

or with the tall vertical side of the vertical modules. Mis-

alignment of an inserted latching connector into either

module will not result in a positive latch. The connector is

released by depressing the rear section of the connector

lever, and then pulling the connector assembly away from

the module housing.

The simplex latching connector is available in gray (HFBR-

4503Z) or blue (HFBR-4513Z).

Duplex connectors provide convenient duplex cable

termination and are keyed to prevent incorrect insertion

into duplex congured modules. The duplex connector is

compatible with dual combinations of horizontal or vertical

Versatile Link components (e.g., two horizontal transmit-

ters, two vertical receivers, a horizontal transmitter with a

horizontal receiver, etc.). The duplex non-latching connec-

tor is available in parchment, o-white (HFBR-4506Z).

HFBR-4516Z – Duplex Latching

The duplex latching connector is designed for rugged

applications requiring greater retention force than the

nonlatching duplex connector. When inserting the duplex

latching connector into a module, the connector latch

mechanism should be aligned with the top surface of the

dual combination of horizontal or vertical Versatile Link

components. The duplex latching connector is available

in gray (HFBR-4516Z).

Feedthrough/Splice

HFBR-4505Z/4515Z Bulkhead Adapter

The HFBR-4505Z/4515Z adapter mates two simplex

connectors for panel/bulkhead feedthrough of HFBR-

4501Z/4511Z terminated plastic ber cable. Maximum

panel thickness is 4.1 mm (0.16 inch). This adapter can

serve as a cable in-line splice using two simplex connec-

tors. The adapters are available in gray (HFBR-4505Z) and

blue (HFBR-4515Z). This adapter is not compatible with

POF duplex, POF simplex latching, or HCS connectors.

DUPLEX

CRIMP RING

HFBR-4526Z

P1-P3 P4-P6 P7-P9 P10-P10

HFBR-RTD001

Mfr. #:

Buy HFBR-RTD001

Manufacturer:

Broadcom / Avago

Description:

FIBER OPTIC CBL LC-LC POF 1M

Lifecycle:

New from this manufacturer.

Delivery:

DHL FedEx Ups TNT EMS

Payment:

T/T Paypal Visa MoneyGram Western Union

HFBR-RTD001

HFBR-RTD001

Products related to this Datasheet