7
Ordering Guide for POF Cable
For Example:
HFBR-RUD500Z is a Standard Attenuation, Unconnectored,
Duplex, 500 meter cable.
HFBR-RLS001Z is a Standard Attenuation, Latching Simplex
Connectored, Simplex, 1 meter cable.
HFBR-RMD010Z is a Standard Attenuation, Standard Du-
plex Connectored, Duplex, 10 meter cable.
HFBR-RMD100Z is a Standard Attenuation, Standard Du-
plex Connectored, Duplex, 100 meter cable.
Ordering Guide for POF Connectors and Accessories
Plastic Optical Fiber Connectors
HFBR-4501Z Gray Simplex Connector/Crimp Ring
HFBR-4511Z Blue Simplex Connector/Crimp Ring
HFBR-4503Z Gray Simplex Latching Connector with Crimp Ring
HFBR-4513Z Blue Simplex Latching Connector with Crimp Ring
HFBR-4506Z Parchment Duplex Connector with Crimp Ring
HFBR-4516Z Gray Duplex Latching Connector with Crimp Ring
HFBR-4505Z Gray Adapter (Bulkhead/Feedthrough)
HFBR-4515Z Blue Adapter (Bulkhead/Feedthrough)
Plastic Optical Fiber Accessories
HFBR-4522Z 500 HFBR-0500 Products Port Plugs
HFBR-4525Z 1000 Simplex Crimp Rings
HFBR-4526Z 500 Duplex Crimp Rings
HFBR-4593Z Polishing Kit (one polishing tool, two pieces 600 grit
abrasive paper, and two pieces 3 µm pink lapping lm)
HFBR-4597Z Plastic Fiber Crimping Tool
Cable Length Tolerances:
The plastic cable length tolerances are: +10%/-0%.
NOTE: By convention, pre-connectored simplex POF ca-
bles have gray and blue colored connectors on the op-
posite ends of the same ber; although oppositely col-
ored, the connectors are mechanically identical. Duplex
POF cables with duplex connectors use color- coded
markings on the duplex ber cable to dierentiate be-
tween the channel.
Note: Not all possible combinations reect available part numbers.
Please contact your local Avago representative for a list of current available cable part numbers.
Connector Code
U = Unconnectored
N = Standard Simplex Connectors
L = Latching Simplex Connectors
M = Standard Duplex Connectors
T = Latching Duplex Connectors
Cable Code
R = Standard Attenuation POF
E = Extra Low Loss POF
HFBR-
Channel Code
S = Simplex Cable
D = Duplex Zipcord Cable
Length Code
(measured from tip of connector to tip of
connector)
Maximum 500 meters (not in 1 meter
increments).
See www.avagotech.com/ber/cables
e.g., 015 = 15 meters
ROHS Compliant
Z
