1
INDUSTRIAL TEMPERATURE RANGE
IDT5T9820
EEPROM PROGRAMMABLE 2.5V ZERO DELAY PLL CLOCK DRIVER
NOVEMBER 2004
2004 Integrated Device Technology, Inc. DSC - 6503/24c
INDUSTRIAL TEMPERATURE RANGE
The IDT logo is a registered trademark of Integrated Device Technology, Inc.
FEATURES:
• 2.5 VDD
• 5 pairs of outputs
• Low skew: 100ps all outputs at same interface level, 250ps all
outputs at different interface levels
• Selectable positive or negative edge synchronization
• Tolerant of spread spectrum input clock
• Synchronous output enable
• Selectable inputs
• Input frequency: 4.17MHz to 250MHz
• Output frequency: 12.5MHz to 250MHz
• Internal non-volatile EEPROM
• JTAG or I
2
C bus serial interface for programming
• Hot insertable and over-voltage tolerant inputs
• Feedback divide selection with multiply ratios of (1-6, 8, 10, 12)
• Selectable HSTL, eHSTL, 1.8V/2.5V LVTTL, or LVEPECL input
interface
• Selectable HSTL, eHSTL, or 1.8V/2.5V LVTTL output interface for
each output bank
• Selectable differential or single-ended inputs and ten single-
ended outputs
• PLL bypass for DC testing
• External differential feedback, internal loop filter
• Low Jitter: <75ps cycle-to-cycle, all outputs at same interface
level: <100ps cycle-to-cycle all outputs at different interface
levels
• Power-down mode
• Lock indicator
• Available in VFQFPN package
IDT5T9820
EEPROM PROGRAMMABLE
2.5V ZERO DELAY PLL
CLOCK DRIVER
DESCRIPTION:
The IDT5T9820 is a 2.5V PLL clock driver intended for high perfor-
mance computing and data-communications applications. The IDT5T9820
has ten outputs in five banks of two, plus a dedicated differential feedback.
The redundant input capability allows for a smooth change over to a
secondary clock source when the primary clock source is absent.
The clock driver can be configured through the use of JTAG/I
2
C program-
ming. An internal EEPROM will allow the user to save and restore the
configuration of the device.
The feedback bank allows divide-by-functionality from 1 to 12 through
the use of JTAG or I
2
C programming. This provides the user with frequency
multiplication 1 to 12 without using divided outputs for feedback. Each output
bank also allows for a divide-by functionality of 2 or 4.
The IDT5T9820 features a user-selectable, single-ended or differential
input to ten single-ended outputs. The clock driver also acts as a translator from
a differential HSTL, eHSTL, 1.8V/2.5V LVTTL, LVEPECL, or single-ended
1.8V/2.5V LVTTL input to HSTL, eHSTL, or 1.8V/2.5V LVTTL outputs. Each
output bank can be individually configured to be either HSTL, eHSTL, 2.5V
LVTTL, or 1.8V LVTTL, including the feedback bank. Also, each clock input
can be individually configured to accept 2.5V LVTTL, 1.8V LVTTL, or
differential signals. The outputs can be synchronously enabled/disabled.
Furthermore, all the outputs can be synchronized with the positive edge
of the REF clock input or the negative edge of REF.