1999 Aug 05 3
Philips Semiconductors Product specification
Remote 16-bit I/O expander for I
2
C-bus
PCF8575C
1 FEATURES
• Operating supply voltage from 4.5 to 5.5 V
• Low standby current consumption of 10 µA maximum
• I
2
C-bus to parallel port expander
• 400 kbits/s FAST I
2
C-bus
• Open-drain interrupt output
• 16-bit remote I/O port for the I
2
C-bus
• Compatible with most microcontrollers
• Latched outputs with high current drive capability for
directly driving LEDs
• Address by 3 hardware address pins for use of up to
8 devices
• SSOP24 package.
2 GENERAL DESCRIPTION
The device is a silicon CMOS circuit. It provides general
purpose remote I/O expansion for most microcontroller
families via the two-line bidirectional bus (I
2
C-bus).
The device consists of a 16-bit quasi-bidirectional port and
an I
2
C-bus interface. The PCF8575C has a low current
consumption and includes latched outputs with high
current drive capability for directly driving LEDs. It also
possesses an interrupt line (INT) which can be connected
to the interrupt logic of the microcontroller. By sending an
interrupt signal on this line, the remote I/O can inform the
microcontroller if there is incoming data on its ports without
having to communicate via the I
2
C-bus. This means that
the device is an I
2
C-bus slave transmitter/receiver.
Every data transmission from the PCF8575C must consist
of an even number of bytes, the first byte will be referred
to as P07 to P00 and the second byte as P17 to P10. The
third will be referred to as P07 to P00 and so on.
3 ORDERING INFORMATION
TYPE
NUMBER
PACKAGE
NAME DESCRIPTION VERSION
PCF8575CTS SSOP24 plastic shrink small outline package; 24 leads; body width 5.3 mm SOT340-1