AH1 (FJ) Miniature Switches
–3–
AECTB15E 201510-T
■ PC board left angle terminal
Notes: 1. The appearance of right and left angle types are as below.
2. Standard packing: 50 pcs./tube.
SPECIFICATIONS
■ Contact rating
■ Characteristics
Notes: 1. Test conditions and judgement are in accordance with NECA C 4505.
2. OF: Value of pin plunger type
■ Operating characteristics
1) Pin plunger
2) Hinge lever
Actuators
Operating Force OF,
Max.
Standard type
(AgNi alloy contact)
Low-level circuit type
(AgNi alloy + Au-clad contact)
Contact form: SPDT Contact form: SPDT
Pin plunger
0.74 N AH18809 AH1880619
1.47 N AH18609 AH1860619
Hinge lever
0.25 N AH18829 AH1882619
0.49 N AH18629 AH1862619
Simulated roller lever
0.26 N AH18849 AH1884619
0.54 N AH18649 AH1864619
Standard rating Minimum rating
Standard type
(AgNi alloy contact)
Plunger color: White
OF 0.74N type 1A 125V AC, 1A 30V DC —
OF 1.47N type 3A 125V AC, 2A 30V DC —
Low-level circuit type (AgNi alloy + Au-clad contact)
Plunger color: Red
0.1A 125V AC, 0.1A 30V DC 5mA 6V DC, 2mA 12V DC, 1mA 24V DC
Item
Standard type
(AgNi alloy contact)
Low-level circuit type
(AgNi alloy + Au-clad contact)
Expected
life
Mechanical life (OT: Specified value)
OF 0.74 N type: Min. 10
6
(at 60 cpm)
OF 1.47 N type: Min. 5 × 10
5
(at 60 cpm)
Electrica (OT: Max.)
Min. 3 × 10
4
(at 20 cpm) (at rated load)
Min. 10
5
(at 20 cpm) (at rated load)
Insulation resistance Min. 100 MΩ (at 500V DC)
Dielectric
strength
Between non-continuous terminals 600 Vrms for 1 min.
Between each terminal and other exposed
metal parts
1,500 Vrms for 1 min.
Between each terminal and ground 1,500 Vrms for 1 min.
Contact resistance (Initial)
Max. 30 mΩ
(by voltage drop, 1A 6 to 8V DC)
Max. 100 mΩ
(by voltage drop, 0.1A 6 to 8V DC)
Vibration resistance (Pin pluger type) 10 to 55 Hz at single amplitude of 0.75mm (Contact opening: Max. 1 msec.)
Shock resistance (Pin plunger type) Min. 294 m/s
2
(Contact opening: Max. 1 msec.)
Allowable operating speed (No load) 1 to 500 mm/sec.
Max. operating cycle rate (No load) 120 cpm
Ambient temperature –25 to +85°C (no freezing and condensing)
Unit weight Approx. 0.5g
Protection grade IP40
3th digit of
Part No.
Operating Force OF,
Max.
Release Force RF,
Min.
Pretravel PT,
Max.
Movement Differential
MD, Max.
Overtravel OT,
Min.
Operating Position OP
6 1.47 N 0.20 N
0.5 mm 0.12 mm 0.25mm
7±0.3 mm
(Distance from stand-off)
5.5±0.2 mm
(Distance from mounting hole)
8 0.74 N 0.098 N
7±0.3 mm
(Distance from stand-off)
5.5±0.2 mm
(Distance from mounting hole)
3th digit of
Part No.
Operating Force OF,
Max.
Release Force RF,
Min.
Pretravel PT,
Max.
Movement Differential
MD, Max.
Overtravel OT,
Min.
Operating Position OP
6 0.49 N 0.049 N
2.1 mm 0.5 mm 0.55 mm
8.3±1.2 mm
(Distance from stand-off)
6.8±1.0 mm
(Distance from mounting hole)
8 0.25 N 0.025 N
8.3±1.2 mm
(Distance from stand-off)
6.8±1.0 mm
(Distance from mounting hole)