E39-S65C Datasheet E39-S65E, E39-S65F, E39-S65A | P1-P3

Photoelectric Sensor with Built-in Amplifier

E3Z

Photoelectric Sensor with built-in amplifier is

applicable to a wide variety

of lines and ensures a

longer sensing distance than any other model.

User-friendly Sensor takes all installation and

on-site conditions into consideration.

Eliminates the influence of installation and on-site

conditions,

thus increasing the reliability of the line.

OMRON has been making efforts towards

environmental protection by adopting user and

environment-friendly measures.

Greatly saves energy and resources. The

economy-oriented age has evolved into the

ecology-oriented age.

Meets a variety of international standards, thus

allowing use in any country.

Ordering Information

List of Models

Red light

Infrared light

Sensing method

Appearance

Connection method

Sensing distance

Model

Se s g e od

ppea a ce

Co ec o e od

Se s gdsa ce

NPN output PNP output

Through-beam

Pre-wired (see note 3)

15 m

E3Z-T61 E3Z-T81

Connector

15 m

E3Z-T66 E3Z-T86

Retroreflective

(with MSR function)

(see note 1)

Pre-wired (see note 3)

(100 mm)

E3Z-R61 E3Z-R81

(

ith

MSR

unc

)

Connector

(100 mm)

(see note 2) E3Z-R66 E3Z-R86

Diffuse-reflective

Pre-wired

(see note 3)

5 to 100 mm

E3Z-D61 E3Z-D81

Connector

5 to 100 mm

(wide view)

E3Z-D66 E3Z-D86

Pre-wired (see note 3)

E3Z-D62 E3Z-D82

Connector

E3Z-D67 E3Z-D87

Note: 1.

The Reflector is sold separately

. Select the Reflector model most suited to the application.

2. The

sensing distance specified is possible when the E39-R1S used. Figure

in parentheses indicate the minimum required distance

between

the Sensor and Reflector

3. Models

provided with a 0.5-m cable are

available. When ordering, specify the cable length by adding the code “0.5M” to the model

number

(e.g., E3Z-T61 0.5M).

Nomenclature

Through-beam Models

E3Z-T6j

Receiver

Retroreflective Models

E3Z-R6j

Diffuse-reflective Models

E3Z-D6j

Stability indicator (green)

Operation selector

Operation indicator (orange)

Sensitivity adjuster

E3Z

Accessories (Order Separately)

Slit for Through-beam Models

Slit width

Sensing distance

(typical)

Minimum sensing

object (typical)

Model

Quantity required

Remarks

0.5 mm dia.

50 mm

0.5 mm dia.

E39-S65A

One each for the

itt d i

These Slits are

il bl f th

1 mm dia.

200 mm

1 mm dia.

E39-S65B

O e eac o e

emitter and receiver

ese S s a e

available for the

E3Z

Tjj

2 mm dia.

800 mm

2 mm dia.

E39-S65C

E3Z

Tjj

0.5

10 mm 1 m

0.7 mm dia.

E39-S65D

10 mm

2.2 m

1.2 mm dia.

E39-S65E

10 mm 5 m

2.4 mm dia.

E39-S65F

Reflectors for Retroreflective Models

Name Sensing

distance (typical)

Model Remarks

Reflector

3 m

(100

mm)

E39-R1

Retroreflective

models are not

id d ith R fl t

eeco

4 m

(100

mm)

E39-R1S

eoeec e

ode s a e o

provided with Reflectors.

5 m

(100

mm)

(see note 2)

E39-R2

The MSR function is available.

Miniature Reflector

1.5 m

(50

mm)

(see note 2)

E39-R3

ape Reflector

700 mm

(150

mm)

(see note 2)

E39-RS1

ae eeco

1.1 m

(150

mm)

(see note 2)

E39-RS2

1.4 m

(150

mm)

(see note 2)

E39-RS3

Note: 1.

Figure in parentheses indicates the minimum required distance between the Sensor and Reflector

2. The

actual sensing

distance may be reduced to approximately 70% of the typical sensing distance when using a Reflector other

than

E39-R1 or E39-R1S.

Mounting Brackets

Appearance Model

E39-L104

E39-L43

E39-L44

Appearance Model Remarks

E39-L93 For

Sensor adjustment use.

Mounted to the aluminum

frame rails of conveyors

and adjustable with ease.

E39-L98 Vertical protective cover

bracket

Note:

If a through-beam model is used, order two Mounting Brackets for the emitter and receiver respectively

Sensor I/O Connectors

Cable Appearance Cable

type

Model

Standard Straight

2 m

Four-wire type

XS3F-M421-402-A

5 m

XS3F-M421-405-A

L-shaped

2 m

XS3F-M422-402-A

5 m

XS3F-M422-405-A

E3Z

Specifications

Ratings/Characteristics

Item

Sensing

method

Through-beam

Retroreflective with MSR

function

Diffuse-reflective

NPN output E3Z-T61/T66 E3Z-R61/R66 E3Z-D61/D66 E3Z-D62/D67

PNP output

(see note 3)

E3Z-T81/T86 E3Z-R81/R86 E3Z-D81/D86 E3Z-D82/D87

Sensing distance

15 m

4 m (100 mm)*

(when using E39-R1S)

3 m (100 mm)*

(when using E39-R1)

White paper

(100

100 mm): 100

White paper

(300

300 mm):

1 m

Standard sensing object

Opaque: 12-mm dia.

min.

Opaque: 75-mm dia. min.

---

Hysteresis ---

20% max. of setting distance

Directional angle

Both emitter and

receiver: 3 to 15

2 to 10

° ---

Light source (wave length)

Infrared LED (860 nm)

Red LED (680 nm)

Infrared LED (860 nm)

Power supply voltage

12 to 24 VDC

10% including 10% (p-p) max. ripple

Current consumption

Emitter:

15 mA

Receiver:

20 mA

30 mA max.

Control output

Load power supply voltage: 26.4 V max.

Load current:

100 mA max. (Residual voltage: 1 V max.)

Open collector output (NPN or PNP depending on model)

L-ON/D-ON selectable

Circuit protection

Protection from load

short-circuit and

reversed power supply

connection

Protection from reversed power supply connection, output short-circuit,

and mutual interference protection

Response time

Operation or reset: 1 ms max.

Sensitivity adjustment

One-turn adjuster

Ambient illumination

(receiver side)

Incandescent lamp:

3,000

ȏx max.

Sunlight:

10,000

ȏx max.

Ambient temperature

Operating: –25

C to 55

C/Storage: –40

C to 70

C (with no icing or condensation)

Ambient humidity

Operating: 35% to 85%/Storage: 35% to 95% (with no condensation)

Insulation resistance

20 M

Ω

min. at 500 VDC

Dielectric strength

1,000 V

AC, 50/60 Hz for 1 min

ibration resistance

10 to 55 Hz, 1.5-mm double amplitude or 300 m/s

for 2 hours each in X, Y

, and Z directions

Shock resistance

Destruction: 500 m/s

3 times each in X, Y, and Z directions

Degree of protection

IP67 (IEC60529)

Connection method

500-mm-thick pre-wired cable (standard length: 2 m) with M8 connector

Indicator

Operation indicator (orange)

Stability indicator (green)

Emitter has power indicator (orange) only

Weight

(packed

tt)

Pre-wired cable

(2 m)

Approx. 120 g

Approx. 65 g

state)

Connector

Approx. 30 g Approx. 20 g

Material

Case

PBT (polybutylene terephthalate)

ae a

Lens

Methacrylate resin

Accessories

Instruction manual (The Reflector or Mounting Bracket is not provided with any of the above

models.)

Note:

*Figures in parentheses indicate the minimum required distances between the Sensors and Reflectors.

P1-P3 P4-P6 P7-P9 P10-P12

E39-S65C

Mfr. #:

Buy E39-S65C

Manufacturer:

Omron Automation and Safety

Description:

Photoelectric Sensors APERTURE 2.0 DI AMETER

Lifecycle:

New from this manufacturer.

Delivery:

DHL FedEx Ups TNT EMS

Payment:

T/T Paypal Visa MoneyGram Western Union

E39-S65C

E39-S65C

Products related to this Datasheet