OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

BLA2AAG221SN4D

P1-P3P4-P6P7-P8
Spec. No. JENF243A–0016Q-01 P 1/ 8
MURATA MFG CO., LTD.
Reference
Onl
y
Chip Ferrite Bead Array
BLA2A□□□□□SN4□ Reference Specification
1. Scope
This reference specification applies to Chip Ferrite Bead Array BLA2A Series used for electronic machinery.
2. Part Numbering
(ex.) BL
A 2A AG 121 S N 4 D
(1)
(2) (3) (4) (5) (6) (7) (8) (9)
(1) Product ID
(2) Type (3) Dimension (L×Ｗ)
(4) Characteristics
(5) Typical Impedance at 100MHz (6) Performance
(7) Category
(8) Numbers of Circuit (9) Packaging (D : Taping / B : Bulk)
3. Rating
Customer
Part Number
MURATA
Part Number
Impedance ()
at 100MHz,
(Under Standard
Testing Condition)
Rated
Current
(mA)
DC Resistance
( max.)
Insulation
Resistance
between
Elements
Remark
Initial
Values
Values
After
Testing
BLA2AAG121SN4D
120 ± 25 % 100 0.5 0.6
100M
min.
For
general
use
BLA2AAG121SN4B
BLA2AAG221SN4D
220 ± 25 %
50
0.7 0.8
BLA2AAG221SN4B
BLA2AAG601SN4D
600 ± 25 % 1.1 1.2
BLA2AAG601SN4B
BLA2AAG102SN4D
1000 ± 25 % 1.3 1.4
BLA2AAG102SN4B
BLA2ABB100SN4D
10 ± 25 %
200
0.1 0.2
For high
speed
signal
Line
BLA2ABB100SN4B
BLA2ABB220SN4D
22 ± 25 % 0.2 0.3
BLA2ABB220SN4B
BLA2ABB470SN4D
47 ± 25 % 0.35 0.45
BLA2ABB470SN4B
BLA2ABB121SN4D
120 ± 25 %
50
0.6 0.7
BLA2ABB121SN4B
BLA2ABB221SN4D
220 ± 25 % 0.9 1.0
BLA2ABB221SN4B
BLA2ABD750SN4D
75 ± 25 %
200
0.20 0.30
BLA2ABD750SN4B
BLA2ABD121SN4D
120 ± 25 % 0.35 0.45
BLA2ABD121SN4B
BLA2ABD221SN4D
220 ± 25 %
100
0.40 0.50
BLA2ABD221SN4B
BLA2ABD471SN4D
470 ± 25 % 0.65 0.75
BLA2ABD471SN4B
BLA2ABD601SN4D
600 ± 25 % 0.80 0.90
BLA2ABD601SN4B
BLA2ABD102SN4D
1000 ± 25 % 50 1.00 1.10
BLA2ABD102SN4B
· Operating Temperature: - 55 °C to + 125 °C · Storage Temperature: - 55 °C to + 125 °C
Spec. No. JENF243A–0016Q-01 P 2/ 8
MURATA MFG CO., LTD.
Reference
Onl
y
4. Style and Dimensions
■ Equivalent Circuit
No polarity
■ Unit Mass (Typical value)
0.005g
5. Marking
No marking.
6. Standard Testing Conditions
< Unless otherwise specified > < In case of doubt >
Temperature : Ordinary Temp. 15 ºC to 35 °C Temperature: 20 °C ± 2 °C
Humidity: Ordinary Humidity 25 %(RH) to 85 %(RH) Humidity : 60 %(RH) to 70 %(RH)
Atmospheric pressure: 86 kPa to 106 kPa
7. Electrical Performance
No. Item Specification Test Method
7.1 Impedance Meet item 3.
Measuring Frequency : 100 MHz ± 1 MHz
Measuring Equipment : Agilent 4291A or the equivalent
(OSC = 0.05 V)
Test Fixture : Agilent 16192A
7.2 DC Resistance Meet item 3. Measuring Equipment : Digital multi meter
7.3 Insulation Resistance
between Elements
Meet item 3. Measuring Voltage : 5 V(DC)
Measuring Time
: 1 min max.
8. Mechancal Performance
No. Item Specification Test Method
8.1 Appearance and
Dimensions
Meet item 4. Visual Inspection and measured with Slide
Calipers or Micrometer or Measuring Microscope.
8.2 Bonding
Strength
Meet Table 1.
Table 1
It shall be soldered on the substrate.
Applying Force(F) : 9.8 N
Applying Time : 5 s ± 1 s
8.3 Bending
Strength
It shall be soldered on the substrate.
Subtrate : Glass-epoxy substrate
(100mm 40mm 1.0mm)
Deflection : 2.0 mm
Speed of Applying Force : 0.5 mm / s
Keeping Time : 30 s
Appearance No damage
Impedance
Change
(at 100MHz)
Within ± 30 %
DC
Resistance
Meet item 3.
45
R340
F
Deflection
45
Product
Pressure jig
:Electrode
(in mm)
2.0±0.2
0.25±0.15
0.5
±0.1
0.2±0.15
1.0±0.2
0.5
±0.1
Product
F
Substrate
Spec. No. JENF243A–0016Q-01 P 3/ 8
MURATA MFG CO., LTD.
Reference
Onl
y
No. Item Specification Test Method
8.4 Solderability The electrodes shall be at least 95 %
covered with new solder coating.
Flux : Ethanol solution of rosin, 25 (wt)%
Pre-Heating : 150 °C ± 10 °C, 60 s ~ 90 s
Solder :Sn-3.0Ag-0.5Cu
Solder Temperature : 240 °C ± 5 °C
Immersion Time : 3 s ± 1 s
Immersion and emersion rates : 25 mm / s
8.5 Resistance to
Soldering Heat
Meet Table 1. Flux : Ethanol solution of rosin, 25 (wt)%
Pre-Heating : 150 °C ± 10 °C, 60 s ~ 90 s
Solder : Sn-3.0Ag-0.5Cu
Solder Temperature : 270 °C ± 5 °C
Immersion Time : 10 s ± 1 s
Immersion and emersion rates : 25 mm / s
Then measured after exposure in the room
condition for 48 h ± 4 h.
8.6 Vibration It shall be soldered on the substrate.
Osclilation Frequency : 10Hz to 55Hz to 10Hz
for 1 min
Total Amplitude : 1.5 mm
Testing Time : A period of 2 hours in each of
3 mutually erpendicular directions.
8.7 Drop Product shall be no failure after tested. It shall be dropped on concrete or steel board.
Method : free fall
Height : 75 cm
Attitude from which the product is dropped :
3 directions
The Number of Time : 3 times for each direction
(Total 9 times)
9. Environmental Performance (It shall be soldered on the substrate.)
No. Item Specification Test Method
9.1 Temperature
Cycle
Meet Table 1.
1 cycle
1 step : -55 °C (+0 °C , -3 °C ) / 30min ± 3min
2 step: Ordinary temp. / 10min to 15min
3 step : +125 °C (+3 °C , -0 °C) / 30min ± 3min
4 step: Ordinary temp. / 10min to 15min
Total of 100 cycles
Then measured after exposure in the room
condition for 48 h ± 4 h.
9.2 Humidity Temperature : 40 °C ± 2 °C
Humidity : 90 %(RH) to 95 %(RH)
Time : 1000 h (+48 h , -0 h)
Then measured after exposure in the room
condition for 48 h ± 4 h.
9.3 Heat Life Temperature : 125 C ± 3 °C
Applying Current : Rated Current
Time : 1000 h (+48 h , -0 h)
Then measured after exposure in the room
condition for 48 h ± 4 h.
9.4 Cold Resistance Temperature : - 55 °C ± 2 °C
Time : 1000 h (+48 h , -0 h)
Then measured after exposure in the room
condition for 48 h ± 4 h.
P1-P3P4-P6P7-P8

BLA2AAG221SN4D

Mfr. #:
Buy BLA2AAG221SN4D
Manufacturer:
Murata Electronics
Description:
Ferrite Beads BLA2AAG221SN4D
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet