Nexperia
74AUP1G175-Q100
Low-power D-type flip-flop with reset; positive-edge trigger
74AUP1G175_Q100 All information provided in this document is subject to legal disclaimers. © Nexperia B.V. 2017. All rights reserved.
Product data sheet Rev. 2 — 10 March 2017
4 / 17
8 Limiting values
Table 5. Limiting values
In accordance with the Absolute Maximum Rating System (IEC 60134). Voltages are referenced to GND (ground = 0 V).
Symbol Parameter Conditions Min Max Unit
V
CC
supply voltage -0.5 +4.6 V
I
IK
input clamping current V
I
< 0 V -50 - mA
V
I
input voltage
[1]
-0.5 +4.6 V
I
OK
output clamping current V
O
< 0 V -50 - mA
V
O
output voltage Active mode and Power-down mode
[1]
-0.5 +4.6 V
I
O
output current V
O
= 0 V to V
CC
- ±20 mA
I
CC
supply current - 50 mA
I
GND
ground current -50 - mA
T
stg
storage temperature -65 +150 °C
P
tot
total power dissipation T
amb
= -40 °C to +125 °C
[2]
- 250 mW
[1] The minimum input and output voltage ratings may be exceeded if the input and output current ratings are observed.
[2] For SC-88 packages: above 87.5 °C the value of P
tot
derates linearly with 4.0 mW/K.
9 Recommended operating conditions
Table 6. Recommended operating conditions
Symbol Parameter Conditions Min Max Unit
V
CC
supply voltage 0.8 3.6 V
V
I
input voltage 0 3.6 V
Active mode 0 V
CC
VV
O
output voltage
Power-down mode; V
CC
= 0 V 0 3.6 V
T
amb
ambient temperature -40 +125 °C
Δt/ΔV input transition rise and fall rate V
CC
= 0.8 V to 3.6 V - 200 ns/V
