OMO ElectronicOMO Electronic
Expand menu
0 Cart

HMC344ATCPZ-EP-R7

P1-P3P4-P6P7-P8
0.1 GHz to 8 GHz,
GaAs, Nonreflective, SP4T Switch
Enhanced Product
HMC344ATCPZ-EP
Rev. 0 Document Feedback
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700 ©2018 Analog Devices, Inc. All rights reserved.
Technical Support www.analog.com
FEATURES
Broadband frequency range: 0.1 GHz to 8 GHz
Nonreflective 50 Ω design
Low insertion loss: 1.7 dB at 6 GHz
High isolation: 36 dB at 6 GHz
High input linearity at 250 MHz to 8 GHz
P1dB: 28 dBm typical
IP3: 44 dBm typical
Integrated 2 to 4 line decoder
16-lead, 3 mm × 3 mm LFCSP package
ESD HBM rating: 250 V (Class 1A)
ENHANCED PRODUCT FEATURES
Supports defense and aerospace applications (AQEC
standard)
Military temperature range (−55°C to +125°C)
Controlled manufacturing baseline
One assembly/test site
Product change notification
Qualification data available on request
APPLICATIONS
Broadband telecommunications systems
Fiber optics
Switched filter banks
Wireless Infrastructure below 8 GHz
FUNCTIONAL BLOCK DIAGRAM
12
11
10
1
3
4
9
2
6
5
7
8
16
15
14
13
GND
RF4
NIC
NIC
RF3
2:4
DECODER
HMC344ATCPZ-EP
PACKAGE
BASE
RF1
NIC
GND
RFC
GND
NIC
NIC
RF2
GND
V
EE
CTLB
CTLA
16637-001
F
igure 1.
GENERAL DESCRIPTION
The HMC344ATCPZ-EP is a broadband, nonreflective, single-
pole, four-throw (SP4T) switch manufactured using a gallium
arsenide (GaAs) metal semiconductor field effect transistor
(MESFET) process. This switch offers high isolation, low
insertion loss, and on-chip termination of the isolated ports.
The switch operates with a negative supply voltage (V
EE
) range
of −5 V to −3 V and requires two negative logic control voltages.
The HMC344ATCPZ-EP includes an on-chip, binary two-line
to four-line decoder that provides logic control from two logic
input lines.
The HMC344ATCPZ-EP comes in a 3 mm × 3 mm, 16-lead
LFCSP package and operates from a 0.1 GHz to 8 GHz frequency
range.
Additional application and technical information can be found
in the HMC344ALP3E data sheet.
HMC344ATCPZ-EP Enhanced Product
Rev. 0 | Page 2 of 8
TABLE OF CONTENTS
Features .............................................................................................. 1
Enhanced Product Features ............................................................ 1
Applications ....................................................................................... 1
Functional Block Diagram .............................................................. 1
General Description ......................................................................... 1
Revision History ............................................................................... 2
Specifications ..................................................................................... 3
Absolute Maximum Ratings ............................................................ 4
ESD Caution...................................................................................4
Pin Configuration and Function Descriptions ..............................5
Interface Schematics .....................................................................6
Typical Performance Charcteristics ................................................7
Outline Dimensions ..........................................................................8
Ordering Guide .............................................................................8
REVISION HISTORY
3/2018—Revision 0: Initial Version
Enhanced Product HMC344ATCPZ-EP
Rev. 0 | Page 3 of 8
SPECIFICATIONS
V
EE
= −3 V or −5 V, control voltage (V
CTL
) = 0 V or V
EE
, case temperature (T
CASE
) = 25°C, 50 Ω system, unless otherwise noted.
Table 1.
Parameter Symbol Test Conditions/Comments Min Typ Max Unit
FREQUENCY RANGE
f
8
GHz
INSERTION LOSS
Between RFC and RF1 to RF4 (On) 0.1 GHz to 2 GHz 1.4 2.0 dB
2 GHz to 4 GHz 1.4 2.0 dB
4 GHz to 6 GHz 1.7 2.2 dB
6 GHz to 8 GHz 2.1 2.5 dB
ISOLATION
Between RFC and RF1 to RF4 (Off) 0.1 GHz to 2 GHz 39 43 dB
2 GHz to 4 GHz 33 37 dB
4 GHz to 6 GHz 32 36 dB
6 GHz to 8 GHz 28 32 dB
RETURN LOSS
RFC and RF1 to RF4 (On) 0.1 GHz to 2 GHz 12 16 dB
2 GHz to 4 GHz 12 16 dB
4 GHz to 6 GHz 11 16 dB
6 GHz to 8 GHz 6 11 dB
RF1 to RF4 (Off) 0.1 GHz to 8 GHz 11 16 dB
SWITCHING
Rise and Fall Time t
RISE
, t
FALL
10% to 90% of radio frequency (RF) output 35 ns
On and Off Time t
ON
, t
OFF
50% V
CTL
to 90% of RF output 75 ns
INPUT LINEARITY
1
f = 250 MHz to 8 GHz
1 dB Power Compression P1dB V
EE
= −5 V 23 28 dBm
V
EE
= −3 V 25 dBm
Third-Order Intercept IP3 10 dBm per tone, 1 MHz spacing
V
EE
= −5 V 40 44 dBm
V
EE
= −3 V 44 dBm
SUPPLY V
EE
pin
Voltage V
EE
−5 −3 V
Current I
EE
2.5 6 mA
DIGITAL CONTROL INPUTS CTLA and CTLB pins
Voltage V
CTL
Low V
INL
V
EE
= −5 V −3 0 V
V
EE
= −3 V −1 0 V
High V
INH
V
EE
= −5 V −5 −4.2 V
V
EE
= −3 V −3 −2.2 V
Current I
CTL
Low I
INL
40 µA
High I
INH
0.10 µA
OPERATING TEMPERATURE −55 +125 °C
1
Input linearity performance degrades at frequencies less than 250 MHz.
P1-P3P4-P6P7-P8

HMC344ATCPZ-EP-R7

Mfr. #:
Buy HMC344ATCPZ-EP-R7
Manufacturer:
Analog Devices / Hittite
Description:
RF Switch ICs EP DC-8 GHz SP4T-V Non-Reflective Switch
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet