CBTL04DP211 All information provided in this document is subject to legal disclaimers. © NXP B.V. 2012. All rights reserved.
Product data sheet Rev. 2 — 13 April 2012 8 of 18
NXP Semiconductors
CBTL04DP211
DisplayPort 2 : 1 multiplexer
10. Characteristics
10.1 General characteristics
10.2 DisplayPort Main Link channel characteristics
Table 8. General characteristics
Symbol Parameter Conditions Min Typ Max Unit
I
DD
supply current V
DD
=3.3V - 200 500 μA
P
cons
power consumption V
DD
=3.3V --4mW
t
startup
start-up time supply voltage valid to channel specified
operating characteristics
--10μs
t
rcfg
reconfiguration time GPU_SEL or AUX_SEL state change to
channel specified operating characteristics
--1μs
Table 9. DisplayPort Main Link channel characteristics
Symbol Parameter Conditions Min Typ Max Unit
V
I
input voltage −0.3 - +3.3 V
V
IC
common-mode input voltage 0 - 2.0 V
V
ID
differential input voltage peak-to-peak - - +1.2 V
DDIL differential insertion loss channel is on; f = 100 MHz - −1.6 - dB
channel is on; f = 1.5 GHz - −2.7 - dB
channel is off; 0 Hz ≤ f ≤ 1.5 GHz - −35 - dB
DDRL differential return loss channel is on; 0 Hz ≤ f ≤ 1.5 GHz - −10 - dB
DDNEXT differential near-end crosstalk adjacent channels are on;
0Hz≤ f ≤ 1.5 GHz
- −40 - dB
B bandwidth −3.0 dB intercept - 2.0 - GHz
t
PD
propagation delay from INx_n+/INx_n− port to
OUT_n+/OUT_n− port or vice versa
-100-ps
t
sk(dif)
differential skew time intra-pair - 5 - ps
t
sk
skew time inter-pair - - 180 ps