1
FN8240.3
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 1-888-468-3774
| Intersil (and design) is a registered trademark of Intersil Americas Inc.
XDCP is a trademark of Intersil, Inc. Copyright Intersil Americas Inc. 2005, 2006. All Rights Reserved
All other trademarks mentioned are the property of their respective owners.
ISL95710
Digitally Controlled Potentiometer (XDCP™)
Terminal Voltage ±2.7V to ±5V, 128 Taps,
Up/Down Interface
The Intersil ISL95710 is a digitally controlled potentiometer
(XDCP). The device consists of a resistor array, wiper
switches, a control section, and nonvolatile memory. The
wiper position is controlled by a Up/Down interface.
The potentiometer is implemented by a resistor array
composed of 127 resistive elements and a wiper switching
network. Between each element and at either end are tap
points accessible to the wiper terminal. The position of the
wiper element is controlled by the CS
, U/D, and INC inputs.
The position of the wiper can be stored in nonvolatile memory
and then be recalled upon a subsequent power-up operation.
The device can be used as a three-terminal potentiometer or
as a two-terminal variable resistor in a wide variety of
applications including:
• Industrial and automotive control
• Parameter and bias adjustments
• Amplifier bias and control
Pinout
ISL95710
(10 LD MSOP)
TOP VIEW
Features
• Non-Volatile Solid-State Potentiometer
• Up/Down Interface with Chip Select Enable
• DCP Terminal Voltage ±2.7V to ±5.5V
• 128 Wiper Tap Points
- Wiper position stored in nonvolatile memory and
recalled on power-up
• 127 Resistive Elements
-Typical R
TOTAL
tempco = ±50ppm/°C
- End to end resistance range ±20%
• Low Power CMOS
- Standby current, 1µA
- Active current, 3mA max
-V
CC
= 2.7V to 5.5V
- V- = -2.7V to -5.5V
• High Reliability
- Endurance, 200,000 data changes per bit
- Register data retention, 50 years
•R
TOTAL
Values = 10k50k
• Package
-10 Ld MSOP
- Pb-free plus anneal (RoHS compliant)
GND
INC
U/D
V-
1
2
3
4
10
9
8
7
R
H
R
W
NC
VCC
5
R
L
6
CS
Ordering Information
PART NUMBER
(Notes 1, 2) PART MARKING
RESISTANCE OPTION
()
TEMP. RANGE
(°C)
PACKAGE
(Pb-Free) PKG. DWG. #
ISL95710WIU10Z AKR 10k -40 to +85 10 Ld MSOP M10.118
ISL95710UIU10Z AKP 50k -40 to +85 10 Ld MSOP M10.118
NOTES:
1. Add “-T” suffix for tape and reel.
2. Intersil Pb-free plus anneal products employ special Pb-free material sets; molding compounds/die attach materials and 100% matte tin plate
termination finish, which are RoHS compliant and compatible with both SnPb and Pb-free soldering operations. Intersil Pb-free products are
MSL classified at Pb-free peak reflow temperatures that meet or exceed the Pb-free requirements of IPC/JEDEC J STD-020.
Data Sheet August 31, 2006
N
O
T
R
E
C
O
M
M
E
N
D
E
D
F
O
R
N
E
W
D
E
S
I
G
N
S
R
E
C
O
M
M
E
N
D
E
D
R
E
P
L
A
C
E
M
E
N
T
:
I
S
L
9
5
3
1
0