NL17SG34
http://onsemi.com
2
MAXIMUM RATINGS
Symbol Parameter Value Unit
V
CC
DC Supply Voltage −0.5 to +5.5 V
V
IN
DC Input Voltage −0.5 to +4.6 V
V
OUT
DC Output Voltage Output at High or Low State
Power−Down Mode (V
CC
= 0 V)
−0.5 to V
CC
+0.5
−0.5 to +4.6
V
I
IK
DC Input Diode Current V
IN
< GND −20 mA
I
OK
DC Output Diode Current V
OUT
< GND −20 mA
I
OUT
DC Output Source/Sink Current ±20 mA
I
CC
DC Supply Current per Supply Pin ±20 mA
I
GND
DC Ground Current per Ground Pin ±20 mA
T
STG
Storage Temperature Range −65 to +150 °C
T
L
Lead Temperature, 1 mm from Case for 10 Seconds 260 °C
T
J
Junction Temperature Under Bias +150 °C
MSL Moisture Sensitivity Level 1
F
R
Flammability Rating Oxygen Index: 28 to 34 UL 94 V−0 @ 0.125 in
V
ESD
ESD Withstand Voltage Human Body Model (Note 2)
Machine Model (Note 3)
>2000
>100
V
I
LATCHUP
Latchup Performance Above V
CC
and Below GND at 125°C (Note 4) ±100 mA
Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality
should not be assumed, damage may occur and reliability may be affected.
1. Measured with minimum pad spacing on an FR4 board, using 10 mm−by−1 inch, 2−ounce copper trace with no air flow.
2. Tested to EIA/JESD22−A114−A.
3. Tested to EIA/JESD22−A115−A.
4. Tested to EIA/JESD78.
RECOMMENDED OPERATING CONDITIONS
Symbol Characteristics Min Max Unit
V
CC
Positive DC Supply Voltage 0.9 3.6 V
V
IN
Digital Input Voltage 0.0 3.6 V
V
OUT
Output Voltage Output at High or Low State
Power−Down Mode (V
CC
= 0 V)
0.0
0.0
V
CC
3.6
V
T
A
Operating Temperature Range −55 +125 °C
Dt / DV
Input Transition Rise or Fail Rate V
CC
= 3.3 V ± 0.3 V 0 10 ns/V
Functional operation above the stresses listed in the Recommended Operating Ranges is not implied. Extended exposure to stresses beyond
the Recommended Operating Ranges limits may affect device reliability.
