Lead (Pb) Free Product - RoHS Compliant
Standard Red SCD55100A
Yellow SCD55101A
High Efficiency Red SCD55102A
Green SCD55103A
High Efficiency Green SCD55104A
S
limline
0.145’’ 10-Character 5x5 Dot Matrix Serial Input
Dot Addressable Intelligent Display® Devices
2008-07-22 1
DESCRIPTION
The SCD55100A (Red), SCD55101A (Yellow),
SCD55102A (HER), SCD55103A (Green) and
SCD55104A (HEG) are eight digit dot addressable 5 x 5
matrix, Serial Input, Intelligent Display devices.
The ten 3.68 mm (0.145") high digits are packaged in a
rugged, high quality optically transparent, standard
7.62 mm (0.3") pin spacing 28 pin plastic DIP.
The on-board CMOS has a 250 bit RAM, one bit associ-
ated with one LED, each to generate User Defined Char-
acters. Due to the reduced LED count, power
requirement and heat dissipation are reduced by 30%.
Additionally in Power Down Mode quiescent current
is
<50 μA.
The SCD5510XA is designed to work with the Serial port
of most common microprocessors. The multiplex Clock
I/O (CLK I/O) and multiplex Clock Select (
CLKSEL
) pins
offer the user the capability to supply a high speed
external multiplex clock. This feature can minimize audio
in-band interference for portable communication
equipment or eliminate the visual synchronization effects
found in high vibration environments such as avionics
equipment.
FEATURES
Low Profile Package: 60% Smaller than Industry Stan-
dard 10-Digit Display
Ten 3.68 mm (0.145") 5 x 5 Dot Matrix Characters
in Red, Yellow, High Efficiency Red, Green, or
High Efficiency Green
Optimum Display Surface Efficiency
(display area to package ratio)
Low Power–30% Less Power Dissipation
than 5 x 7 Format
High Speed Data Input Rate: 5.0 MHz
ROMless Serial Input, Dot Addressable
Display—Ideal for User Defined Characters
Built-in Decoders, Multiplexers and LED Drivers
Readable from 1.8 meters (6 Feet)
Wide Viewing Angle, X Axis ± 55°, Y Axis ± 65°
Attributes:
250 bit RAM for User Defined Characters
– Eight Dimming Levels
Power Down Mode (<250 μW)
Hardware/Software Clear Function
– Lamp Test
Internal or External Clock
End-Stackable Dual-in-line Plastic Package
3.3 V Capability
2008-07-22 2
SCD55100A, SCD55101A, SCD55102A, SCD55103A, SCD55104A
Package Outlines Dimensions in mm (inch)
Ordering Information
Type Color of Emission Character Height
mm (inch)
Ordering Code
SCD55104A standard red
3.68 (0.145)
Q68100A0988
SCD55101A yellow Q68100A0989
SCD55102A high efficiency red Q68100A0990
SCD55103A green Q68100A0991
SCD55104A high efficiency green Q68100A0992
IDOD5211
2.03 (0.080) 3.81 (0.150)
38.1 (1.500) max.
3.68 (0.145)
Pin
5.08 (0.200)
7.62 (0.300)
±0.51 (0.020)
10 (0.394)
±0.15 (0.006)
0.3 (0.012) typ.
1.27 (0.050) typ.
Indicator
4.06 (0.160)
±0.51 (0.020)
1
33.02 (1.300) ref.
Seating Plane
2.54 (0.100) typ.
±0.25 (0.010)
Tol. non accum.
1
SCD5510XA
OSRAM YYWW
ZY
EIA Date Code
Intensity Code
Hue Code
Dimension is at Seating Plane.
2. Display matrix and pins centered on package outline.
3. Display matrix centered to pin array.
4. Tolerance: ±.XXX (0.010)
1.
1
Color Code
Part No
5. Lead dim .018 wide x .012 THK
0.25 (0.010)
SCD55100A, SCD55101A, SCD55102A, SCD55103A, SCD55104A
2008-07-22 3
Maximum Ratings
Parameter Symbol Value Unit
Operating temperature range T
op
– 40 … + 85 °C
Storage temperature range T
stg
– 40 … + 100 °C
DC Supply Voltage V
CC
-0.5 to + 7.0 V
Input Voltage Levels Relative to GND -0.5 to V
CC
to 0.5 V
Solder Temperature
1.59 mm (0.063“) below seating plane, t < 5.0 s
T
S
260 °C
Relative Humidity 85 %
ESD (100 pF, 1.5 k:)V
Z
2.0 kV
Input Current ± 100 mA
Power Dissipation at 85°C 1.7 W
Maximum Number of LEDs on at 100% Brightness 160
IC Junction Temperature 125 °C
Optical Characteristics at 25°C
(V
CC
=5.0 V at 100% brightness level, viewing angle: X axis ± 55°, Y axis ± 65°)
Description Symbol Values Unit
Red
SCD55100A
Yellow
SCD55101A
High Efficiency Red
SCD55102A
Green
SCD55103A
High Efficiency Green
SCD55104A
Luminous Intensity (min.)
(typ.)
I
V
36
78
124
208
124
237
124
238
124
500
μcd/dot
μcd/dot
Peak Wavelength (typ.) O
peak
665 583 630 565 568 nm
Dominant Wavelength (typ.) O
dom
639 584 626 569 572 nm
Notes:
1. Dot to dot intensity matching at 100% brightness is 1.8:1.
2. Displays are binned for hue at 2.0 nm intervals.
3. Displays within a given intensity category have an intensity matching of 1.5:1 (max.).

SCD55103A

Mfr. #:
Manufacturer:
OSRAM Opto Semiconductors
Description:
LED Displays & Accessories 5x5 Green 0.145", 10-CHARACTER
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet