49
RFI Power Line Filters
1
Dimensions are in inches and millimeters unless otherwise specified. Values in italics
are metric equivalents. Dimensions are shown for reference purposes only.
Specifications subject to change.
Corcom Product Guide
Catalog: 1654001
Issue Date: 06.2011
For email, phone or live chat, please go to
te.com/help
corcom.com
General Purpose RFI Power Line Filters – Ideal for High Impedance Load
K Series
K Series
Maximum leakage current each Line to Ground:
VK Models EK Models
@ 120 VAC 60 Hz: .5 mA .21 mA
@250 VAC 50 Hz: 1.0 mA .36 mA
Hipot rating (one minute):
Line to Ground: 2250 VDC
Line to Line: 1450 VDC
Rated Voltage (max): 250 VAC
Operating Frequency: 50/60 Hz
Rated Current: 1 to 60A*
Operating Ambient Temperature Range
(at rated current I
r
): -10°C to +40°C
In an ambient temperature (T
a
) higher than +40°C
the maximum operating current (I
o
) is calculated as
follows: I
o
= I
r
(85-Ta)/45
• Suitable fo
r high impedance loads
• Well suited to applications where pulsed,
continuous and/or intermittent RFI interference
is present
• EK models meet the very low leakage current
requirements for VDE portable equipment and
non-patient care medical equipment
• Available with ground line inductor (choke)
Ordering Information
10 E K 7 M
Suffix
M – Metric inserts (style 7 only)
Omit for standard or none
C – Ground choke (30, 40VK6 only)
Input / Output Style
1 – .250 [6.3] spade terminals
3 – Wire leads
6 – Threaded bolt
7 – IEC inlet*
(line side)
.250 [6.3] spade terminals
(load side)
K Series
Leakage current designation
E – Low leakage (<0.5 mA)
V – Standard
C
urrent Rating
1, 2, 3, 5, 10, 20, 30, 40 or 60A
Specifications
UL Recognized
CSA Certified
VDE Approved**
VK3 / EK3
Available Part Numbers
1VK1 10VK6 2EK3
1VK3 10VK7 3EK1
2VK1 10VK7M 3EK3
2VK3 20VK1 3EK7
3VK1 20VK6 3EK7M
3VK3 20VK7* 5EK1
3VK7 30VK6 5EK3
3VK7M 30VK6C 5EK7
5VK1 40VK6 5EK7M
5VK3 40VK6C 10EK1
5VK7 60VK6 10EK3
5VK7M 1EK1 10EK7
10VK1 1EK3 10EK7M
10VK3 2EK1 20EK1
VK6
*1-15A: IEC 60320-1 C14 inlet mates with C13 connector
20VK7: C20 inlet mates with C19 connector
VK1 / EK1
VK7 / EK7
**20VK7, 20A model tested by Underwriters Laboratories
to US and Canadian requirements and is
VDE approved at 16A, 250VAC
