6
FN9284.3
July 8, 2010
Absolute Voltage Ratings
VIN to VSS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -0.3V to +28V
VDD to VSS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -0.3V to +7.0V
PVCC to PGND . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -0.3V to +7.0V
VSS to PGND . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -0.3V to +0.3V
PHASE to VSS. . . . . . . . . . . . . . . . . . . . . . . . . . (DC) -0.3V to +28V
(<100ns Pulse Width, 10µJ) -5.0V
BOOT to PHASE . . . . . . . . . . . . . . . . . . . . . . . . . . . . -0.3V to +7.0V
BOOT to VSS or PGND . . . . . . . . . . . . . . . . . . . . . . . . -0.3V to +33V
UGATE. . . . . . . . . . . . . . . . . . . (DC) -0.3V to PHASE, BOOT +0.3V
(<200ns Pulse Width, 20µJ) -4.0V
LGATE . . . . . . . . . . . . . . . . . . . . (DC) -0.3V to PGND, PVCC +0.3V
(<100ns Pulse Width, 4µJ) -2.0V
ALL Other Pins. . . . . . . . . . . . . . . . . . . . . -0.3V to VSS, VDD +0.3V
Thermal Information
Thermal Resistance (Typical, Notes 4, 5) θ
JA
(°C/W) θ
JC
(°C/W)
32 Ld QFN Package. . . . . . . . . . . . . . . 35 6
Junction Temperature Range. . . . . . . . . . . . . . . . . . -55°C to +150°C
Operating Temp. Range (ISL6263ACRZ) . . . . . . . .-10°C to +100°C
Operating Temp. Range (ISL6263AIRZ) . . . . . . . . . -40°C to +100°C
Storage Temperature . . . . . . . . . . . . . . . . . . . . . . . .-65°C to +150°C
Pb-free Reflow Profile . . . . . . . . . . . . . . . . . . . . . . . . .see link below
http://www.intersil.com/pbfree/Pb-FreeReflow.asp
Recommended Operating Conditions
Ambient Temp. Range
ISL6263ACRZ . . . . . . . . . . . . . . . . . . . . . . . . . . -10°C to +100°C
ISL6263AIRZ . . . . . . . . . . . . . . . . . . . . . . . . . . . -40°C to +100°C
VIN to VSS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . +5V to +25V
VDD to VSS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . +5V ±5%
PVCC to PGND . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . +5V ±5%
FDE to VSS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0V to +3.3V
CAUTION: Do not operate at or near the maximum ratings listed for extended periods of time. Exposure to such conditions may adversely impact product reliability and
result in failures not covered by warranty.
NOTES:
4. θ
JA
is measured in free air with the component mounted on a high effective thermal conductivity test board with “direct attach” features. See
Tech Brief TB379.
5. For θ
JC
, the “case temp” location is the center of the exposed metal pad on the package underside.
Electrical Specifications These specifications apply for T
A
= -40°C to +100°C, unless otherwise stated. All typical specifications
T
A
= +25°C, V
DD
= 5V, PV
CC
= 5V. Boldface limits apply over the operating temperature range,
-40°C to +100°C.
PARAMETER SYMBOL TEST CONDITIONS
MIN
(Note 6) TYP
MAX
(Note 6) UNITS
VIN
VIN Input Resistance R
VIN
VR_ON = 3.3V 1.0 MΩ
VIN Shutdown Current I
VIN_SHDN
VR_ON = 0V, V
IN
= 25V 1.0 µA
VDD and PVCC
VDD Input Bias Current I
VDD
VR_ON = 3.3V 2.4 3.0 mA
VDD Shutdown Current I
VDD_SHDN
VR_ON = 0V, V
DD
= 5.0V 1.0 µA
VDD POR THRESHOLD
Rising VDD POR Threshold Voltage
V
VDD_THR
4.35 4.50 V
Falling VDD POR Threshold Voltage
V
VDD_THF
3.85 4.10 V
REGULATION
Output Voltage Range
V
GFX_MAX
VID<4:0> = 00000 1.28750 V
V
GFX_MIN
VID<4:0> = 11111 0.41200 V
VID Voltage Step VID<4:0> = 00000 to 11110
(1.28750V to 0.51500V)
25.75 mV/step
VID<4:0> = 11110 to 11111
(0.51500V to 0.41200V)
103 mV
System Accuracy ISL6263ACRZ VID = 1.28750V to 0.74675V
T
A
= 0°C to +100°C
-0.5 0.5 %
VID = 0.72100V to 0.51500V
T
A
= 0°C to +100°C
-1.0 1.0 %
VID = 0.41200
T
A
= 0°C to +100°C
-3.0 3.0 %
ISL6263A
