S2S5FA0F
1
Sheet No.: OP14019EN
Notice The content of data sheet is subject to change without prior notice.
In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP
devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
S2S5FA0F Phototriac Coupler include an infrared
emitting diode (IRED) optically coupled to
an output Phototriac.
These devices feature full wave control and are
ideal isolated drivers for medium to high current
Triacs.
SOP package provides 3.75kV isolation from input
to output with superior commutative noise immunity.
1. High repetitive peak off-state voltage (V
DRM
: 600V)
2. Non-zero crossing functionality
3. 4pin Mini-flat package
4. Superior noise immunity
(dV/dt : MIN. 500V/μs)
5. Double transfer mold construction
(Ideal for Flow Soldering)
6. High isolation voltage between input and output
(V
iso
(rms) : 3.75kV)
1. Recognized by UL1577 (Double protection
isolation), file No. E64380 (as model No. S2S5)
2. Approved by CSA, file No. CA95323
(as model No. S2S5)
3. Optionary available VDE Approved
(*)
(DIN EN 60747-5-5), file No. 40009162
(as model No. S2S5)
4. Package resin : UL flammability grade (94V-0)
(*)
DIN EN60747-5-5 : successor standard of DIN EN60747-5-2
UP to Date code “S1” (January 2004), approval of DIN
EN60747-5-2.
From Date code “E4” (April 2014), approval of DIN
EN60747-5-5
1. Triggering for Triacs used to switch on and off
devices which require AC loads.
For example heaters, fans, motors, solenoids, and
valves.
2. Triggering for Triacs used for implementing phase
control in applications such as lighting control and
temperature control (HVAC).
3. AC line control in power supply applications.
■
Agency approvals/Compliance
V
DRM
: 600V, Cost effective
Non-zero cross type
Mini-Flat Package
Phototriac Coupler for triggering
S2S5FA0F
