(7)
3M
Bumpon
Protective Products
Resilient Rollstock SJ5200
SJ5800
SJ5900
SJ6000
SJ6200 Series
Die Cut Considerations
Very important that knives be sharp.
•  Although rotary die cutting can be used for thicker materials (≥ 1/16 inches), distortion in the die cut shape is 
possible using this die cutting method. Flat bed die cutting is recommended for thicker materials.
The R-25 (synthetic rubber) adhesive system is very firm (tough). It can be more difficult to die cut versus the
R-30 and A-20 adhesive systems. Also, the R-25 adhesive system is inherently stringy; as a result, if the adhesive
is not thoroughly cut, the adhesive may have a tendency to string-out when the die cut parts are removed from
the release liner quickly or by using a snapping motion. The adhesive string-out will not diminish the performance
of the product.
Some re-welding (tendency of the adhesive system to flow back together after die cutting) is possible with the
R-25 adhesive system. Exposure to high temperature (greater than the recommended storage temperature of
60° to 80°F [1 to 27°C]) in combination with time and pressure will increase the tendency of re-welding.
Die Cut Examples
3M™ Bumpon™ Resilient Rollstock Products can be die cut to a variety of shapes and sizes.
The following examples illustrate just a few of the possibilities.
Storage and Shelf Life
The shelf life of 3M™ Bumpon™ Protective Products is 18 months from the date of manufacture when stored in the
original packaging materials and stored at 16-2C (60-80°F) and 50% relative humidity.
3M
Bumpon
Protective Products
Resilient Rollstock SJ5200
SJ5800
SJ5900
SJ6000
SJ6200 Series
(8)
Regulatory: For regulatory information about this product, contact your 3M representative.
Technical Information: The technical information, recommendations and other statements contained in this document are based upon
tests or experience that 3M believes are reliable, but the accuracy or completeness of such information is not guaranteed.
Product Use: Many factors beyond 3M’s control and uniquely within user’s knowledge and control can affect the use and performance
of a 3M product in a particular application. Given the variety of factors that can affect the use and performance of a 3M product, user
is solely responsible for evaluating the 3M product and determining whether it is fit for a particular purpose and suitable for user’s
method of application.
Limitation of Liability: Except where prohibited by law, 3M will not be liable for any loss or damage arising from the 3M product,
whether direct, indirect, special, incidental or consequential, regardless of the legal theory asserted, including warranty, contract,
negligence or strict liability.
3M and Bumpon are trademarks of 3M Company.
Formica is a registered trademark of the Formica Corporation.
Please recycle.
©3M 2015. All rights reserved.
60-5002-0523-6
Electronics Materials Solutions Division
3M Center, Building 224-3N-11
St. Paul, MN 55144-1000
1-800-251-8634 phone
651-778-4244 fax
www.3M.com/electronics
Warranty, Limited Remedy, and Disclaimer: Unless an additional warranty is specifically stated on the applicable 3M product
packaging or product literature, 3M warrants that each 3M product meets the applicable 3M product specification at the time 3M ships
the product. 3M MAKES NO OTHER WARRANTIES OR CONDITIONS, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO,
ANY IMPLIED WARRANTY OR CONDITION OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR ANY IMPLIED
WARRANTY OR CONDITION ARISING OUT OF A COURSE OF DEALING, CUSTOM OR USAGE OF TRADE. If the 3M product does
not conform to this warranty, then the sole and exclusive remedy is, at 3M’s option, replacement of the 3M product or refund of the
purchase price.

SJ6016

Mfr. #:
Manufacturer:
3M
Description:
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet