JN5148/001M03T,534 Datasheet JN5148/001M03T,534, JN5148/001M04T,534, JN5148/001M00T,534 | P19-P21

A.7.1 Antennas approved by FCC for use with JN5148 modules

Brand Model Number Description Gain (dBi) Connector type

1 Aveslink Technology, Inc E-0360-AT Patch Antenna - outdoor 18 RP-N

2 Aveslink Technology, Inc E-0260-AT Patch Antenna - outdoor 15 RP-N

3 Aveslink Technology, Inc E-1050-AT Vertical - outdoor colinear 15 RP-N

4 Aveslink Technology, Inc E-1040-AT Vertical - outdoor colinear 12 RP-N

5 Aveslink Technology, Inc E-0100-AC Patch Antenna - flying lead 10 RP-SMA

6 Aveslink Technology, Inc E-1030-AT Vertical - outdoor colinear 9 RP-N

7 Aveslink Technology, Inc E-1020-AT Vertical - outdoor colinear 7 RP-N

8 Aveslink Technology, Inc E-1710-GC Vertical - swivel 7 RP-SMA

9 Aveslink Technology, Inc E-1710-GM Vertical - swivel 7 RP-TNC

10 Aveslink Technology, Inc E-1511-GC Vertical - swivel 5 RP-SMA

11 Aveslink Technology, Inc E-0030-AA Patch Antenna - flying lead 4 uFL

12 Aveslink Technology, Inc E-0030-AC Patch Antenna - flying lead 4 RP-SMA

13 Aveslink Technology, Inc E-1204-AC Ceiling antenna - flying lead 4 RP-SMA

14 Aveslink Technology, Inc E-1520-CA Vertical - bulkhead- flying lead 4 uFL

15 Aveslink Technology, Inc E-1520-GC Vertical - swivel 4 RP-SMA

16 Aveslink Technology, Inc E-1450-GC Vertical-swivel mount 4 RP-SMA

17 Nearson S152CL-L-PX-2450S Vertical - knuckle-flying lead 4 uFL

18 Antenna Factor ANT-2.4-CW-RCL Vertical - knuckle antenna 2.9 RP-SMA

19 Aveslink Technology, Inc E-0901-AA Embedded - flying lead 2.5 uFL

20 Antenna Factor ANT-2.4-CW-RCT-RP Vertical - knuckle antenna 2.2 RP-SMA

21 Antennova 2010B6090-01 Vertical - knuckle antenna 2.2 RP-SMA

22 Hyperlink Technology HG2402RD-RSF Vertical - knuckle antenna 2.2 RP-SMA

23 Aveslink Technology, Inc E-0005-AC Vertical- flying lead 2 RP-SMA

24 Aveslink Technology, Inc E-2411-GC Vertical - swivel 2 RP-SMA

25 Aveslink Technology, Inc E-2410-CA Vertical - bulkhead- flying lead 2 uFL

26 Aveslink Technology, Inc E-2410-GC Vertical - swivel 2 RP-SMA

27 Aveslink Technology, Inc E-2820-CA Vertical - bulkhead- flying lead 2 uFL

28 Aveslink Technology, Inc E-2820-GC Vertical - swivel 2 RP-SMA

29 Aveslink Technology, Inc E-0903-AX Embedded - nickel silver strip 2 None

30 Aveslink Technology, Inc E-0904-AX Embedded - nickel silver strip 2 None

31 Embedded Antenna Design FBKR35068-RS-KR Vertical - knuckle antenna 2 RP-SMA

32 Nearson S131CL-L-PX-2450S Vertical - knuckle-flying lead 2 uFL

33 Laird Technologies WRR2400-IP04 Vertical - knuckle-flying lead 1.5 uFL

34 Laird Technologies WRR2400-RPSMA Vertical - knuckle-flying lead 1.3 RP-SMA

35 Aveslink Technology, Inc E-6170-DA Vertical - right angle 1 uFL

36 Laird Technologies WCR2400-SMRP Vertical - knuckle antenna 1 RP-SMA

37 Siretta ANTC0010G0200GQ12 PCB antenna – flying lead uFL 2.6 uFL

These antennae or versions with alternative connectors may be used to meet European regulations.

This device has been designed to operate with the antennas listed above, and having a maximum gain of 4.4 dBi.

Antennas not included in this list or having a gain greater than 4.4 dBi are strictly prohibited for use with this device.

The required antenna impedance is 50 ohms.

A.7.2 High Power Module usage limitation

The high power module variants are classified as ‘mobile’ device pursuant with FCC § 2.1091 and must not be used

at a distance of < 20 cm (8”) from any people.

IMPORTANT NOTE: In the event that these conditions can not be met (for certain configurations or co-location with

another transmitter), then the FCC authorization is no longer considered valid and the FCC ID can not be used on the

final product. In these circumstances, the OEM integrator will be responsible for re-evaluating the end product

(including the transmitter) and obtaining a separate FCC authorization.

The OEM integrator has to be aware not to provide information to the end user regarding how to install or remove this

RF module in the user manual of the end product.

The user manual for the end product must include the following information in a prominent location;

“To comply with FCC’s RF radiation exposure requirements, the antenna(s) used for this transmitter must not be co-

located or operating in conjunction with any other antenna or transmitter.”

A.7.3 High Power Module channel restriction

The FCC grant for the TYOJN5148M4 does not permit the use of channel 26. Access to channel 26 is forbidden by

the 802.15.4 MAC layer when the JN5148 chip is in high power mode. Users will not be able to access channel 26

when using the JN5148-001-M04 module under any circumstances.

A.7.4 FCC End Product Labelling

The final ‘end product’ should be labelled in a visible area with the following:

“Contains TX FCC ID: TYOJN5148M0, TYOJN5148M3 or TYOJN5148M4 ” to reflect the version of the module being

used inside the product.

A.8 Industry Canada Statement

To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the

equivalent isotropically radiated power (e.i.r.p.) is not more than that permitted for successful communication.

These modules have been designed to operate with antennas having a maximum gain of 18 dBi. Antennas having a

gain greater than 18 dBi are strictly prohibited for use with this device. The required antenna impedance is 50 ohms.

As long as the above condition is met, further transmitter testing will not be required. However, the OEM integrator is

still responsible for testing their end-product for any additional compliance requirements required with this module

installed (for example, digital device emissions, PC peripheral requirements, etc).

A.8.1 Industry Canada End Product Labelling

For Industry Canada purposes the following should be used.

“Contains Industry Canada ID IC: 7438A-CYO5148M0, IC: 7438A-CYO5148M3 or IC: 7438A-CYO5148M4” to reflect

the version of the module being used inside the product.

20 JN-DS-JN5148-001-Myy 1v4 © NXP Laboratories UK 2010

A.9 European R & TTE Directive 1999/5/EC Statement

All modules listed in this datasheet are compliant with ETSI EN 300 328V1.7.1 (2006/05) and are subject to a Notified

Body Opinion.

The modules are approved for use with the antennas listed in the following table. The high power module M04 is

limited to an antenna with a gain of 2.2 dBi or less and is approved for use with a reduced output power: +10dBm

EIRP is the maximum permitted.

Brand Model Number Description Gain (dBi) Connector type

1 Aveslink Technology, Inc E-0100-AC Patch Antenna - flying lead 10 RP-SMA

2 Aveslink Technology, Inc E-1030-AT Vertical - outdoor colinear 9 RP-N

3 Aveslink Technology, Inc E-1020-AT Vertical - outdoor colinear 7 RP-N

4 Aveslink Technology, Inc E-1710-GC Vertical - swivel 7 RP-SMA

5 Aveslink Technology, Inc E-1710-GM Vertical - swivel 7 RP-TNC

6 Aveslink Technology, Inc E-1511-GC Vertical - swivel 5 RP-SMA

7 Aveslink Technology, Inc E-0030-AA Patch Antenna - flying lead 4 uFL

8 Aveslink Technology, Inc E-0030-AC Patch Antenna - flying lead 4 RP-SMA

9 Aveslink Technology, Inc E-1204-AC Ceiling antenna - flying lead 4 RP-SMA

10 Aveslink Technology, Inc E-1520-CA Vertical - bulkhead- flying lead 4 uFL

11 Aveslink Technology, Inc E-1520-GC Vertical - swivel 4 RP-SMA

12 Aveslink Technology, Inc E-1450-GC Vertical-swivel mount 4 RP-SMA

13 Nearson S152CL-L-PX-2450S Vertical - knuckle-flying lead 4 uFL

14 Antenna Factor ANT-2.4-CW-RCL Vertical - knuckle antenna 2.9 RP-SMA

15 Aveslink Technology, Inc E-0901-AA Embedded - flying lead 2.5 uFL

16 Antenna Factor ANT-2.4-CW-RCT-RP Vertical - knuckle antenna 2.2 RP-SMA

17 Antennova 2010B6090-01 Vertical - knuckle antenna 2.2 RP-SMA

18 Hyperlink Technology HG2402RD-RSF Vertical - knuckle antenna 2.2 RP-SMA

19 Aveslink Technology, Inc E-0005-AC Vertical- flying lead 2 RP-SMA

20 Aveslink Technology, Inc E-2411-GC Vertical - swivel 2 RP-SMA

21 Aveslink Technology, Inc E-2410-CA Vertical - bulkhead- flying lead 2 uFL

22 Aveslink Technology, Inc E-2410-GC Vertical - swivel 2 RP-SMA

23 Aveslink Technology, Inc E-2820-CA Vertical - bulkhead- flying lead 2 uFL

24 Aveslink Technology, Inc E-2820-GC Vertical - swivel 2 RP-SMA

25 Aveslink Technology, Inc E-0903-AX Embedded - nickel silver strip 2 None

26 Aveslink Technology, Inc E-0904-AX Embedded - nickel silver strip 2 None

27 Embedded Antenna Design FBKR35068-RS-KR Vertical - knuckle antenna 2 RP-SMA

28 Nearson S131CL-L-PX-2450S Vertical - knuckle-flying lead 2 uFL

29 Laird Technologies WRR2400-IP04 Vertical - knuckle-flying lead 1.5 uFL

30 Laird Technologies WRR2400-RPSMA Vertical - knuckle-flying lead 1.3 RP-SMA

31 Aveslink Technology, Inc E-6170-DA Vertical - right angle 1 uFL

32 Laird Technologies WCR2400-SMRP Vertical - knuckle antenna 1 RP-SMA

33 Siretta ANTC0010G0200GQ12 PCB antenna – flying lead uFL 2.6 uFL

P1-P3 P4-P6 P7-P9 P10-P12 P13-P15 P16-P18 P19-P21 P22-P23

JN5148/001M03T,534

Mfr. #:

Buy JN5148/001M03T,534

Manufacturer:

NXP Semiconductors

Description:

RF TXRX MODULE 802.15.4 U.FL ANT

Lifecycle:

New from this manufacturer.

Delivery:

DHL FedEx Ups TNT EMS

Payment:

T/T Paypal Visa MoneyGram Western Union

JN5148/001M03T,534

JN5148/001M03T,534

Products related to this Datasheet