MKP1847H AC Filtering
www.vishay.com
Vishay Roederstein
Revision: 16-Mar-17
13
Document Number: 26067
For technical questions, contact: dc-film@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Note
Sub-clause numbers of tests and performance requirements refer to the “Sectional Specification, Publication IEC 61071”.
5.12
Resonance frequency measurement
Impedance analyzer at T
amb
> 0.9 times the value as specified in typical
curve “Resonant frequency” of this
specification
5.15-0
Initial measurements
Capacitance at 1 kHz
tan at 10 kHz
Insulation resistance
5.15-1
Endurance test between terminals
Sequence:
1.25 x (U
RMS
at 85 °C) at T
max.
= 85 °C
1.25 x (U
OPAC
at 105 °C) at T
max.
= 105 °C
Duration: 500 h
1000 x discharge at 1.4 x Î
(maximum peak current)
1.25 x (U
RMS
at 85 °C) at T
max.
= 85 °C
1.25 x (U
OPAC
at 105 °C) at T
max.
= 105 °C
Duration: 500 h
5.15-2
Final measurement
Capacitance
tan 
Insulation resistance
|C/C| 3.0 %
Increase of tan 0.0150
compared to the values measured in 5.15-0
Insulation resistance 50 % of specified
values
5.16.3-0
Initial measurements
Capacitance at 1 kHz
5.16.3-1
Destruction test sequence for segmented film
The capacitors must be put in an oven at
T
max.
= 105 °C/2 h and cooled down
Product enveloped with cheese cloth
High DC voltage test (limited to 200 mA) 3 x U
NDC
with minimum 2000 V
DC
,
duration = 1 min
Discharge the capacitor, duration = 1 min
DC power supply capable of obtaining the
desired breakdown voltage
High AC voltage test
AC
RMS
voltage = 1 x U
N
, duration = 15 s
The above sequence shall be repeated
until the test sample capacitance loss 10 %
of its initial measurement in 5.16.3B-0
No burning of the cheese cloth
5.16.3-2
Final measurements
Visual examination
Capacitance at 1 kHz
The dielectric must withstand the test
sequence conducted
INSPECTION REQUIREMENTS
SUB-CLAUSE NUMBER AND TEST CONDITIONS PERFORMANCE REQUIREMENTS
Legal Disclaimer Notice
www.vishay.com
Vishay
Revision: 08-Feb-17
1
Document Number: 91000
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of
typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding
statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a
particular product with the properties described in the product specification is suitable for use in a particular application.
Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over
time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.
Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for
such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document
or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
© 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED

MKP1847H57031JP5

Mfr. #:
Manufacturer:
Vishay
Description:
Connector, Film, MKP 7F 5% 310Vac pitch37, 5 pins 4
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union